High durability powder coatings MT-810 AM
Product Description
MT-810 AM is a series of high durability powder coatings, formulated without TGIC, designed for exterior exposure. Tested against the most severe specifications MT-810 gives significantly improved gloss retention and resistance to colour change. MT-810 AM powders are available in a wide range of colours and gloss levels and can be custom matched to the user’s requirements. MT-810 AM is a high-quality powder coating designed to meet decorative and functional demands of your specifications. Additionally MT-810 AM uses antimicrobial technology to reduce the number of microbes such as bacteria and mold. Test results have proven reduction of bacteria and mold up to 99.9%.
Powder properties
| Chemical Type | Polyester TGIC-free |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.2-1.7 g/cm³ depending on colour |
| Storage | Dry cool conditions below 25°C |
| Shelf life | 12 months |
| Stoving schedule
(object temperature) |
15 minutes at 190°C
10 minutes at 200°C 8 minutes at 210°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Pre-treatment | Chromate conversion |
| Substrate | Aluminium |
| Stoving Schedule
(object temperature) |
10 minutes at 200°C |
| Film Thickness | 60 microns |
Mechanical Tests
| Adhesion
(2mm Crosshatch) |
ISO2409 | Gt 0 |
| Erichsen cupping | ISO1520 | Depends on shade |
| Hardness (4000gms) | ISO 1518 | Pass – no penetration to substrate |
| Flexibility (Conical Mandrel) | ISO6860 | Depends on shade |
| Impact | BS6496 | Depends on shade |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Low Temp Cure&Environment friendly Polyester Powder Coatings | Feature: -Good adhesion and good mechanical properties -Good flowing and glossy -Good chemical resistance and corrosion resistance -Over 120um ... |
 |
Surface Finish Powder Coatings for Performance & Aesthetics | Surface That Performs & Impresses In today’s industrial design, appearance matters as much as performance. Our Powder Coatings by Surfac... |
 |
Metallic Powder Coating | Introduction We offer a wide range of metal-effect powder coatings, all manufactured in China and ready for global export with consistent quality ... |
 |
Non-stick Polytetrafluoroethylene (PTFE) Powder Coating | Premium PTFE Powder Coating Solutions China-Based Manufacturing | Global Industrial Support We manufacture and export a comprehensive range of Po... |
 |
Pantone Powder Coating | Pantone Powder Coating – Pantone Colour Charts Powder coating is a durable, environmentally friendly finishing process widely used in aerosp... |
Same products
 |
Trimellitic anhydride 97% | 卖方: Yufeng International Group Co., Ltd | Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a... |
 |
Isobutyric Anhydride CAS 97-72-3 | 卖方: Yufeng International Group Co., Ltd | Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo... |
 |
Isobutyric Acid CAS 79-31-2 | 卖方: Yufeng International Group Co., Ltd | Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met... |
 |
2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5 | 卖方: Yufeng International Group Co., Ltd | AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and... |
 |
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 | 卖方: Yufeng International Group Co., Ltd | Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture... |
