Pure epoxy primer powder MT Plus -AL117N
Product Description
Pure epoxy primer powder MT Plus -AL117N is a powder primer protective barrier designed to give enhanced corrosion protection of mild steel, hot dip galvanized steel and Zinc sprayed (gas flame/electrical deposition) and Aluminium. MT Plus is a pure epoxy primer showing a high cross-linking degree reinforced with barrier effect agents to provide the best barrier protection.
Pure epoxy primer powder MT Plus -AL117N must be over-coated with ourpowders or a Cromadex / Inernational PU liquid topcoat. It could be used as holding primer with a maximum waiting delay of 3 weeks.
Key benefits:
Wide curing range, good mechanical properties, excellent edge coverage, good anti gassing properties, good over coating capacity.
Powder Properties
| Chemical type | Thermosetting epoxy |
| Appearance | Smooth |
| Gloss level(60°) | Aspect may vary depending on curing conditions (green cure) |
| Color | Grey |
| Recommended Film Thickness (µm) | 60 – 80 µm |
| Density (g/cm3) | 1.5 ± 0.03 g/cm³ |
| Application | Electrostatic |
| Storage | Under dry, cool (≤ 30°C) conditions |
| Shelf life | At least 12 months from production date |
Pretreatment
Surface preparation depends upon the metal, the type of surface, its conditions and the required performance.
| Substrate | Mechanical pretreatment | Chemical pretreatment |
| Mild steel | Grit Blasting Sa 2.5 in accordance with ISO NF EN 8501-1. Roughness: Rz 42 84 µm / Ra 6-12 µm. | Degreasing & phosphating (or equivalent) followed by passivation, DW rinsing and drying. |
| Cast steel | ||
| Electro Zinc steel | Sweeping with a maximum zinc layer thickness reduction of 5 to Degreasing & phosphating (or equivalent) followed by passivation, DW rinsing and drying. Hot dip galvanized steel Degreasing & phosphating / chromating followed by passivation. 10 µm depending on the initial zinc thickness. | |
| Hot dip galvanized steel | Degreasing & phosphating / chromating followed by passivation. | |
| Aluminium | Sweeping | Follow QUALICOAT (16th edition) recommendations for pre-treatment methods. |
| Zinc sprayed
(gas flame/electrical deposition) |
Grit Blasting Sa 3 in accordance with ISO NF EN 8501-1. Roughness: Rz 42 84 µm / Ra 6-12 µm | Banned |
Application
MT Plus is suitable for corona electrostatic spraying.
| Recommended film thickness | 60-80 µm A good protection is linked with the recommended film thickness. |
| Recycling | Unused powder can be reclaimed using suitable equipment and recycled through the coating system, but a minimum of 70% new powder should be used. |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Polyester/TGIC powder coating series | Made of polyester resin and TGIC curing agent as the main raw materials. Features: —Good adhesion, excellent mechanical properties, tough c... |
 |
Hammertone Powder Coating | Introduction We are a leading powder coating manufacturer specializing in Hammertone Powder Coating with full customization services. Based in Chi... |
|
|
Red Wrinkle Color Powder Coating | Introduction Texture Wrinkle Type Epoxy resin series Main Material Epoxy resin,curing agent,filler,piment,adhesive Advanta... |
|
|
High durability powder coatings MT-800 AM | Product Description MT-800 AM is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specif... |
|
|
Powder coating for outdoor furniture | Product Description Powder coating for outdoor leisure furniture has excellent decorative appearance, and the coating film has excellent corrosion... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
