.

Powder coating for fitness equipment

Product description

Powder coating for fitness equipment has an excellent decorative appearance, and the coating film has excellent corrosion resistance, wear resistance, good flexibility and other excellent properties.

Transportation packaging

Carton packaging, lined with two layers of PVC plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be avoided from direct sunlight, moisture and heat, and contact with chemicals.

Application areas

Fitness equipment.

Health and safety

Operators should wear dust masks during use to avoid inhaling dust, and minimize long-term contact between skin and powder coating. The coating attached to the skin can be washed with soap.

Coating properties

Test items Inspection index Inspection standard or method
Appearance Visual inspection Flat and smooth, slight orange peel is allowed
Gloss (60°) GB/T 9754 Agreed
Film thickness GB/T 1764 ≥60 μm
Adhesion GB/T 9286 Level 0
Surface hardness GB/T 6739 ≥H
Neutral salt spray resistance GB/T 1771 500h; scribed area: unidirectional rust ≤2.0mm; unscribed area: no abnormality
Impact GB/T 1732 50Kg·cm, positive and negative pass
Cupping GB/T 9753 ≥6mm
Bending GB/T 6742 ≤2mm
Curing conditions 180℃/15min

If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Powder coating for automobile springs
Powder coating for automobile springs Product description Powder coating for automobile springs is outdoor pure polyester powder coating with excellent weather resistance and mechanica...
Soft Coral Gold powder coating
Soft Coral Gold powder coating Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,...
Functional Powder Coatings for Industry
Functional Powder Coatings for Industry Introduction Our Functional Powder Coatings go beyond aesthetics—built to endure harsh environments, resist damage, and meet specific techni...
PH Regulator STD-608 (Alkaline)
PH Regulator STD-608 (Alkaline) Performance and use This product is made of acidic chemicals as the main ingredients, with buffers, synergists, stabilizers, etc. After adding, it...
Low Temp Cure&Environment friendly Polyester Powder Coatings
Low Temp Cure&Environment friendly Polyester Powder Coatings Feature: -Good adhesion and good mechanical properties -Good flowing and glossy -Good chemical resistance and corrosion resistance -Over 120um ...
供应产品

Same products

Easy-cleaning Silicone-Modified Waterborne UV Resin
Easy-cleaning Silicone-Modified Waterborne UV Resin 卖方: Guangzhou Human New Material Science and Technology Co., Ltd LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d...
Water-based Soft-Touch Resin for Consumer Electronics
Water-based Soft-Touch Resin for Consumer Electronics 卖方: Guangzhou Human New Material Science and Technology Co., Ltd Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve...
Conformal Coatings
Conformal Coatings 卖方: Guangzhou Human New Material Science and Technology Co., Ltd The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro...
Metalized & Laser Transfer coating
Metalized & Laser Transfer coating 卖方: Guangzhou Human New Material Science and Technology Co., Ltd Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ...
Hydrophilic coatings for Air Conditioner
Hydrophilic coatings for Air Conditioner 卖方: Guangzhou Human New Material Science and Technology Co., Ltd A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi...