Architectural aluminium powder coating MT-D1036 Gloss/ Satin/ Matt
Product Description
MT-D1036 Gloss/ Satin/ Matt is a range of durable powder coatings specially formulated without of TGIC for use on architectural aluminium components. MT-D1036 Gloss/ Satin/ Matt typically meets the performance requirement of AAMA 2603 , AS 3715 and Qualicoat 1 specifications. MT-D1036 Gloss/ Satin/ Matt is designed to provide excellent exterior durability and colour retention and conforms to the requirements of all the major Asia architectural finishing standards.
All MT-D1036 powders are lead-free available in a wide range of color in full gloss such as high gloss, satin and matt finishes. It is designed to produce texture, pearlescent and other special effects can be custom matched to the users’requirements.
Powder Properties
| Chemical Type | Polyester |
| Gloss level (60°) | Depend on the colour |
| Specific Gravity | 1.2-1.75 g/cm³ depending on colour and effect |
| Particle Size | Suitable for electrostatic spray |
| Storage | Dry cool conditions below 30°C (open boxes must be resealed) |
| Shelf life | 12 months below 30°C |
| Curing schedule
(at object temperature) |
10 minutes at 200°C |
Mechanical Tests
| Flexibility | ISO 1519 (cylindrical Mandrel) or ASTM D522 | Pass 5mm |
| Adhesion | ISO 2409 / ASTM D 3359 (2mm crosshatch) | Gt0 |
| Erichsen cupping | ISO 1520 | Pass >3mm |
| Impact resistance | ISO 6272:1993 / ASTM D2794 | Pass 2.5 Joules (reverse & direct (20 in lb) |
Pre-treatment
For maximum protection it is essential to pretreat components prior to the application of MT- D1036 Gloss/ Satin/ Matt Aluminium components should receive a full multi-stage chromate conversion coating or suitable chrome-free pre-treatment or suitable pre-anodising to clean and condition the substrate. Detailed advice should be sought from the pre-treatment supplier. Galvanised steel requires surface preparation by either multi-stage pretreatment using either zinc phosphate or chromate conversion or controlled sweep blasting. Depending on the type of galvanizing, degassing or use of anti-bubbling additives may be required – follow the procedural advice of the pretreatment supplier. MT-D1036 products may also be used on cast or mild steel. For outdoor use, MT-PZ anti-corrosive primer over a correctly prepared substrate is recommended.
Application
MT-D1036 Gloss (85) powders can be applied by manual or automatic electrostatic spray or tribo-charging equipment. For solid shades, unused powder can be reclaimed up to a maximum of 30% using suitable equipment and recycled through the system. MT-D1036 powders should be applied at minimum 60µm. All powders can show small colour differences from batch to batch, this is normal and unavoidable. Applicators and fabricators are advised to use a single batch for parts that will be assembled together. Differences are more likely with special effect powders. Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid “marble effect”and changes in aspect after recycling. A constant ratio between virgin and recycled powders should be fixed by the coater in order to achieve a consistent effect. For more details it is suggested to read the “Metallic Application Guideline”. Different substrates (aluminium, steel, galvanized steel…), use of primer, and big changes in film thickness may give a different aspect. Products with different codes should not be mixed even if same colour and gloss.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Residential Powder Coating | Surface Finish Options Overview Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good physical... |
 |
High-Weatherability Powder Coating for Gas Pipelines | Product SegmentationApplication Fields High-Weatherability Powder Coating for Gas Pipelines Outdoor gas pipes Application Fiel... |
 |
Profile powder | Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according t... |
 |
Dual-Layer Epoxy Anti-Corrosion Powder Coating -best powder coat for outdoor use | Product Introduction: This dual-layer epoxy powder coating is formulated using multiple types of epoxy resins and functional curing agents. The ba... |
 |
Coil Powder Coating Manufactory-low emission powder coating factory | Coil coating is a continuous industrial process in which multiple layers of organic film are applied and cured on a moving metal strip. The paints ... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
