Glass powder coating
1. Product Overview
This product takes polyester resin and epoxy resin as the main base materials, integrating the excellent decorative performance, mechanical properties and good corrosion resistance of both epoxy and polyester.
1.1 STD. Platinum FEVE Fluoropolymer Powder Coating
Innovative Powder Coatings that Perform as Well as They Look
STD. Platinum represents a breakthrough in powder coating technology. Coatings offer FGIA/AAMA 2605 compliance, backed by more than 10 years of test data (Florida), and a high transfer efficiency rate that is 20% higher than standard FEVE powders. But that’s just the beginning—follow along below to learn more about the color and performance benefits available for architectural and extrusion sheet aluminum.
1.1.1 A New Study of Competing FEVE Fluoropolymer Coatings
A recent study demonstrates that STD. Platinum powder is in a class of its own. Compared to other hyper-durable products on the market, STD. Platinum exhibited twenty times the color retention of competitors’ FEVE powder coatings. New data indicates that STD. Platinum maintains its performance significantly at the five-year mark, whereas competing architectural powder coatings show a notable decline in color stability.
STD. Platinum FEVE fluoropolymer powder coatings were designed with color fastness and longevity in mind.
1.1.2 Benefits
-
Superior Color Retention: Compared to other hyper-durable products, STD. Platinum showed twenty times the color retention of competitors.
-
Minimal Color Loss: STD. Platinum exhibited only a 6% loss in color retention over a five-year period, while similarly colored competitor products demonstrated more than a 100% loss in color retention in the same period.
-
High Transfer Efficiency: Over 20% improvement over standard FEVE powder, resulting in less waste and better coverage.
-
Extended Gloss Range: 5 – 85, compared to 25 – 70 for standard FEVE products.
-
Reduced Oven Emissions: 70% less e-cap (oven smoke and oven build-up).
-
Improved Corrosion Performance: On aluminum in a single coat.
-
Wide Selection of Colors and Effects: Including popular anodized metal finishes.
1.1.3 Environmental Benefits
Specifically formulated without the following substances:
-
Triglycidyl isocyanurate (TGIC)
-
Perfluorooctanoic acid (PFOA)
-
Fluorosurfactants
-
Volatile organic compounds (VOCs)
-
Hazardous air pollutants (HAPs)
-
Living Building Challenge (LBC) Red List substances
REACH Compliant: Free of Substances of Very High Concern (SVHCs)
1.1.4 Typical Uses
-
Window frames
-
Building panels
-
Storefronts
1.2 Magic Color Metal Powder Coating Series
This series of products is made of special materials supplemented by high-end magic color metal materials. The coating film is highly protective, brilliant, and charming. The visual effect presented by this product is like a well-cut gem formed in the mantle layer of the earth—it is bright and starry, with wonderful three-dimensional optical dimensions and tones, and is deeply loved by the market.
1.3 Glass-Applied Thermosetting Powder Coating
This product changes the traditional spraying process, replacing oily or water-resistant paint with thermosetting powder coating. The coating is sprayed and baked at high temperature to adhere to the glass surface; it is first adsorbed on the glass surface through physical static electricity characteristics, and then further adsorbed after high temperature baking to achieve a perfect spraying effect.
1.3.1 Main Product Performance
-
Bright colors
-
Good fullness
-
Good alcohol resistance
1. Product Overview
This product takes polyester resin and epoxy resin as the main base materials, integrating the excellent decorative performance, mechanical properties and good corrosion resistance of both epoxy and polyester.
1.1 STD. Platinum FEVE Fluoropolymer Powder Coating
Innovative Powder Coatings that Perform as Well as They Look
STD. Platinum represents a breakthrough in powder coating technology. Coatings offer FGIA/AAMA 2605 compliance, backed by more than 10 years of test data (Florida), and a high transfer efficiency rate that is 20% higher than standard FEVE powders. But that’s just the beginning—follow along below to learn more about the color and performance benefits available for architectural and extrusion sheet aluminum.
1.1.1 A New Study of Competing FEVE Fluoropolymer Coatings
A recent study demonstrates that STD. Platinum powder is in a class of its own. Compared to other hyper-durable products on the market, STD. Platinum exhibited twenty times the color retention of competitors’ FEVE powder coatings. New data indicates that STD. Platinum maintains its performance significantly at the five-year mark, whereas competing architectural powder coatings show a notable decline in color stability.
STD. Platinum FEVE fluoropolymer powder coatings were designed with color fastness and longevity in mind.
1.1.2 Benefits
-
Superior Color Retention: Compared to other hyper-durable products, STD. Platinum showed twenty times the color retention of competitors.
-
Minimal Color Loss: STD. Platinum exhibited only a 6% loss in color retention over a five-year period, while similarly colored competitor products demonstrated more than a 100% loss in color retention in the same period.
-
High Transfer Efficiency: Over 20% improvement over standard FEVE powder, resulting in less waste and better coverage.
-
Extended Gloss Range: 5 – 85, compared to 25 – 70 for standard FEVE products.
-
Reduced Oven Emissions: 70% less e-cap (oven smoke and oven build-up).
-
Improved Corrosion Performance: On aluminum in a single coat.
-
Wide Selection of Colors and Effects: Including popular anodized metal finishes.
1.1.3 Environmental Benefits
Specifically formulated without the following substances:
-
Triglycidyl isocyanurate (TGIC)
-
Perfluorooctanoic acid (PFOA)
-
Fluorosurfactants
-
Volatile organic compounds (VOCs)
-
Hazardous air pollutants (HAPs)
-
Living Building Challenge (LBC) Red List substances
REACH Compliant: Free of Substances of Very High Concern (SVHCs)
1.1.4 Typical Uses
-
Window frames
-
Building panels
-
Storefronts
1.2 Magic Color Metal Powder Coating Series
This series of products is made of special materials supplemented by high-end magic color metal materials. The coating film is highly protective, brilliant, and charming. The visual effect presented by this product is like a well-cut gem formed in the mantle layer of the earth—it is bright and starry, with wonderful three-dimensional optical dimensions and tones, and is deeply loved by the market.
2. Basic Business Information
|
Item
|
Details
|
|
Location
|
China
|
|
Business Type
|
Manufacturer, Exporter
|
|
Brand
|
Standard
|
|
Certificate
|
ACS, NSF, QUALICAOT, WRAS, KTW
|
|
Payment and Delivery Terms
|
30% advance payment, 70% before delivery
|
|
Minimum Order Quantity
|
100kg
|
|
Price
|
Negotiable
|
|
Delivery Time
|
7-10 days
|
|
Payment Method
|
T/T, L/C
|
3. Product Features
3.1 Standard Powder Coating
-
Excellent mechanical properties (including impact resistance, hardness, toughness, adhesion, etc.)
-
Good leveling property and glossiness
-
Strong corrosion resistance
3.2 Magic Color Metal Powder Coating
-
360° coating film: 360° viewing angle has a strong metallic feel and extremely high decorativeness
-
Excellent stability and strong protection
-
Alkali resistance, weather resistance and excellent corrosion resistance
4.1 Standard Powder Coating
Household appliances, communication equipment units, indoor fitness equipment, tool boxes, filing cabinets, shelves, lamps, etc.
4.2 Magic Color Metal Powder Coating
Aluminum alloy profiles, aluminum system doors and windows, aluminum veneers, aluminum ceilings, aluminum curtain walls, etc., as well as high-end household appliances, industrial products, car wheels, etc.
4.3 STD. Platinum FEVE Fluoropolymer Powder Coating
Architectural and extrusion sheet aluminum, window frames, building panels, storefronts, etc.
4.4 Glass-Applied Thermosetting Powder Coating
Glass products (specific applications can be customized according to customer needs)
4. Application Areas
4.1 Standard Powder Coating
Household appliances, communication equipment units, indoor fitness equipment, tool boxes, filing cabinets, shelves, lamps, etc.
Aluminum alloy profiles, aluminum system doors and windows, aluminum veneers, aluminum ceilings, aluminum curtain walls, etc., as well as high-end household appliances, industrial products, car wheels, etc.
4.2 Magic Color Metal Powder Coating
4.3 STD. Platinum FEVE Fluoropolymer Powder Coating
4.3 STD. Platinum FEVE Fluoropolymer Powder Coating
Architectural and extrusion sheet aluminum, window frames, building panels, storefronts, etc.
Aluminum alloy profiles, aluminum system doors and windows, aluminum veneers, aluminum ceilings, aluminum curtain walls, etc., as well as high-end household appliances, industrial products, car wheels, etc.
5. Product Series
-
Available types: standard curing type and low temperature curing type
-
Customizable: various gloss levels and colors
-
Diversified textures: flat surface, art texture, metal effect, antique style, etc.
-
Special series: Magic color metal powder coating, STD. Platinum FEVE fluoropolymer powder coating, Glass-Applied Thermosetting Powder Coating
6. Technical Parameters
6.1 Mechanical Properties (Standard Powder Coating)
|
Test Items
|
Test Standards
|
Performance Indicators
|
|
Pencil hardness
|
GB/T6739-1996
|
>H
|
|
Adhesion
|
GB/T9286-1998
|
Grade 0
|
|
Bending
|
GB6742-86
|
3mm
|
|
Impact
|
GB/T1732-93
|
50kg.cm
|
|
Cupping
|
GB9753-88
|
>6mm
|
6.2 Corrosion Resistance (Standard Powder Coating)
|
Test Items
|
Test Standards
|
Performance Indicators
|
|
Salt spray resistance
|
GB/T1771-91
|
No change in coating after 500 hours; single-side isolation at specification <2mm
|
|
Moisture and heat resistance
|
GB/T1740-79
|
>500 hours slight gloss loss, ≤Grade 1
|
6.3 Performance Indicators (Magic Color Metal Powder Coating)
|
Type
|
Item
|
Test Standard
|
Index
|
|
Powder Performance
|
State in Container
|
HG/T2006-2006
|
Uniform color, no foreign matter, loose powder
|
|
Sieve residue (125μm)
|
HG/T2006-2006
|
All passed
|
|
|
Coating Mechanical Properties
|
Adhesion
|
GB/T9286
|
Grade 0
|
|
Impact Resistance
|
GB/T1732
|
Punch Diameter:16±0.3mm；Depth of pit 2.5±0.3mm, no peeling after tape pull test
|
|
|
Cupping resistance
|
GB/T 9753
|
5mm
|
|
|
Bending resistance
|
GB/T 6742
|
5mm After the tape pull test, there is no peeling
|
|
|
Chemical properties of the coating film
|
Boiling water resistance
|
GB5237.4
|
No peeling or wrinkling
|
|
Solvent resistance
|
GB5237.4
|
Grade 3
|
|
|
Salt spray resistance
|
GB/T10125
|
1000h, at the line: unidirectional rust ≤4mm
|
|
|
Moisture and heat resistance
|
GB/T1740
|
1000h no blistering, peeling or other obvious changes
|
|
|
Weather resistance of the coating film
|
Accelerated weather resistance
|
GB/T1865
|
Negotiated, can pass the 4000h test
|
|
Natural weather resistance
|
GB/T9276
|
Negotiated
|
Note: The above parameters are laboratory data for reference only. Actual indicators are related to factors such as customer environment, equipment, materials, pretreatment, and spraying process.
6.4 Powder Performance
Specific gravity: 1.1~1.8g/cm³
7. Application Conditions
7.1 Standard Powder Coating
-
Pretreatment: phosphating, chromating
-
Coating methods: suitable for high-voltage electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying, fluidized bed dipping
-
Curing conditions: 140℃ for 30 minutes
-
180℃ for 15 minutes
-
200℃ for 10 minutes
Can also be customized according to customer needs
7.2 Magic Color Metal Powder Coating - Guide to Use
7.2.1 Curing conditions
200℃/10min; In order to make the coating film of the coated object cure evenly and the gloss stable, it is best to make the temperature distribution in the baking furnace uniform; and reasonably control the curing temperature and time according to the situation of the workpiece.
7.2.2 Pretreatment
The workpiece must be pretreated before spraying, and it must comply with the provisions of Chapter 5 of GB/T 8013.3-2007. The mass of the chromate conversion film should be between 0.4 and 1.0 g/㎡. The time interval between chemical conversion pretreatment and coating should not exceed 16 hours. In principle, coating should be applied immediately after the conversion treatment is dry.
7.2.3 Workpiece hanging
When hanging the workpiece, hang it reasonably according to the shape and thickness of the workpiece to improve the powdering rate and yield; and pay attention to keeping the spraying system and the surrounding environment clean to prevent different brands of powder coating from mixing and affecting the surface effect of the coating.
7.2.4 Powder spraying
Choose reasonable process parameters, control the voltage, air pressure and powder output. The powder spraying environment should preferably have a temperature and humidity control system. The optimal powder spraying temperature is 15-25℃, and the relative air humidity of the powder spraying room is preferably 45%-55%; in addition, the proportion of recycled powder should be controlled to ensure the color stability of the product.
The recommended coating thickness is 60-80um, otherwise it will affect the performance of the coating.
During the film formation process, the color will be slightly affected by process conditions such as temperature and thickness. It is recommended that users conduct tests before use to achieve satisfactory results.
在线联系供应商
Other supplier products
 |
Architectural Acrylic Resin Powder Coating | 1. Product Category Specifications Our diverse range of acrylic formulations is engineered to meet specific chemical and functional requirements: ... |
 |
Food Grade Powder Coatings | Applications & Use Cases IndustryTypical Products/PartsBenefits of Food Grade Powder Coatings Kitchen Appliances Ovens, mixers, to... |
 |
Automotive parts powder coatings MT-A300 Series/powder coating for overseas engineering teams | Product Overview: Weather-resistant pure polyester powder coatings designed for automotive wipers, luggage racks, bumpers and other parts. Charac... |
 |
Wrinkle powder coating-coating powder paint | Applications & Advantages of Wrinkle Powder Coating CategoryDetailsDescription Main Applications Metal Furniture Used for office ... |
 |
Anti-Corrosion Powder Coating for Drinking Water Pipes | Product Introduction: This product is formulated using special epoxy resins, dedicated curing agents, and food-grade pigments and fillers. It feat... |
Same products
 |
Trimellitic anhydride 97% | 卖方: Yufeng International Group Co., Ltd | Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a... |
 |
Isobutyric Anhydride CAS 97-72-3 | 卖方: Yufeng International Group Co., Ltd | Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo... |
 |
Isobutyric Acid CAS 79-31-2 | 卖方: Yufeng International Group Co., Ltd | Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met... |
 |
2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5 | 卖方: Yufeng International Group Co., Ltd | AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and... |
 |
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 | 卖方: Yufeng International Group Co., Ltd | Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture... |
