Electrostatic Spray Antique Copper Vein Hammer Tone Powder Coating
Colors Available:
RAL colors coating powder
Pantone colors
Color-matching regarding customer requirement is
general types for powder coating:
Polyester /Hybrid powder coating
Epoxy Powder coating color
Metallic powder coating color
Hammer tone color powder coating
Texture color powder coating powder paint
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-colors.
Curing Conditions:
180 °C ~ 200 °C (work piece temperature), 10-15 minutes or by customer's requirement.
Average Coverage:
8-12 square meters / kg, thickness 60-80 microns (100% of the powder coating utilization rate).
Storage Requirements:
Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.
Health and Safety:
This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.
Mechanical Property:
| Testing items | Standards and methods | Inspecting index |
|---|---|---|
| Impact strength | GB/T1732-1993, AS3715 2.8 | >50kg/cm |
| Bending resistance | GB/T1185-88, AS1580 402.1, ISO9227 | Pass 2–5 millimeters |
| Adhesion checked test | GB/T9286-88, 2mm Cross cut, ISO2409 | Pass 100/100, passes 0 levels |
| Cupdrawing: Erichsen, ISO1520 | Erichsen, ISO1520 | Pass 3–7 millimeters |
| Pencil hardness | GB/T6739-86, Mitsubishi Erichsen, ISO1520 | 1H or 2H pass |
在线联系供应商
Other supplier products
 |
Sports equipment powder coating | Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic,”... |
 |
Thermosetting Special Powder Coating | I. Product Introduction In today’s world where extreme performance and environmental protection are both highly valued, the thermosetting sp... |
 |
High-Performance Metal Bonding Powder Coating | Key Advantages FeatureBenefit Uniform Finish Metal pigments are firmly bonded to the base powder, ensuring no settling or uneven color... |
 |
Bumper powder coating | Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic,”... |
 |
Conductive Powder Coating | Product Features: Dissipates static electricity to protect the normal operation of low-voltage or micro-electronic components. Prevents the occur... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
