Automatic Cleveland Open-Cup Flash Tester FDT-0131
Fully automatic closed flash point tester cryogenic FDT-0233Application range
Conforms to standard GB/T261-83 and ISO2719-1988 ASTM D93 standard requirements.Features
1, color LCD touch-screen operator interface is friendly
2, the instrument also has a failure since Jane functionality, failure automatically prompt function
3, the instrument has to heat up automatic control, automatically opening the lid and ignition, automatic printout, automatic cooling, the machine automatically complete the barometric pressure correction and automatically display the flash point temperature, built-in micro-thermal printer automatically report the test results
The 4, USB/232 communications interface to communicate with the host computer, easy to form a centralized management system
5, German imports of stainless steel temperature sensor detects the temperature data is accurate and reliable
Mechanical moving parts servo drive timing belt drive, work without gaps, low noise, reliable and difficult to damage, no lubrication maintenance.
7, simply set the expected flash point instrument in strict accordance with the standard automatic test, the end of the test automatically print test results, and tone.Without judgment and does not depend on the proficiency of the operator.
8, thermocouple detection flash point of high sensitivity detection of accurate, durable and easy to maintain.
9, sample box the thermal compound thermostat with built-in refrigeration heating and German imports Dan whisk Adams compressor, thermostat reliable lag, not easily damagedSpecifications
1, use environment: Temperature 0 ~ 60° C; Relative humidity: ≤ 80%
2: 7-inch color LCD touch screen.
3, the heating rate: less than 50 ° C; 1° C; / min, higher than 50 ° C; for 2-3 ° C; / min
4, the temperature range: -30 to +80° C Accuracy ± 1° C;
5,Temperature components: PT100 stainless steel temperature sensor
6, the lifting arm: automatically raised or lowered
7, ignition: gas flame ignition
8, detection: automatically detects flash fire and automatically print the experimental data.
9, Communication: USB/232, communication interface.
10, the cooling system: compressor cooling
11 Print: You can print this or any print stored 100 experimental results
12, using the power AC220V 50Hz, total power: 1.5 kw
Other supplier products
|
Grease oxidation stability analyzer FDH-4901 |
Application range
Grease oxidation stability analyzer, the applicable standard: SH/T0325 ASTM D942
Scope: The determination of the oxidation stab... |
|
变压器油氧化安定性测定仪 FDH-1001 |
grease drum Stability meter FDH-4401
Application range
The grease drum Stability tester applicable standards ASTM D1831 SH/T0122
Measured w... |
|
FDH-0171润滑油抗乳化性能测定仪 |
适用范围
该仪器为国内首创产品,代替原有的有纸记录仪,仪器采用液晶触摸屏全自动控制系统,操作人员只要把试样放进仪器里,仪器自动检测、打印结果,整个过程无需人工操守。其原理是将试样、蒸馏水和铜催化剂线圈一起放到玻璃试管内,然后把它放进氧弹中,氧弹在室温下充入氧气,放入规定温度的油浴中... |
|
oil density Tester FDT-1531 |
Application range
Petroleum products saturated vapor pressure at the standard applicable to GB/T8017-87.Determination of the vapor pressure of petr... |
|
FGC-1070气相色谱仪 |
主要特点
通过各种反馈网络中使用自己的专利技术,电机控制电路,分立元件,自动反馈跟踪电机控制信号,有效地提高了电机的精确控制,保证了泵的可靠性和稳定性
首次引入光纤光谱探测器的设计,保证了波长的准确性,提高了精度。
智能化程度高,可实现网络监控平台,以提高你的质量控制的效率。
自动化,... |
供应产品
Same products