.

Reason Analysis of Using AOC Active Optical Cable in Data Center Wiring

40G/100G AOC active optical cable has been globally introduced throughout the aoc data centerfield. Compared to 40G DAC copper cable, 40G AOC active optical cable has unparalleled advantages in data transmission environment above 7 meters, including the smaller size, lighter weight, easier bending, easier management, longer signal transmission distance, etc. In the data center, the same goals can be achieved with a 40G SR4 optical transceiver. The differences between 40G AOC active optical cable and SR4 optical transceiver are analyzed as follows:

With the same transmission distance, for SR4 optical transceiver, different optical fiber jumpers that are connected to the same module will produce different insertion loss and return loss, which is basically a common problem. However, as long as the variation is within the range, there will be no significant change in the eye map and other related indexes.

The AOC active optical cable which is well made is basically stable and has better rocking performance. The repeated test of the SR4 optical transceiver produced a large fluctuation.

It is measured at four combinations of input voltage and signal amplitude to ensure that the performance can be maintained at both the lowest and highest voltages and temperatures. AOC active optical cable is required to pass quadrant tests with a wide temperature range to ensure that the MPO interface and cable of AOC will not melt at high temperatures. The performance change of MPO interface itself at high and low temperatures can meet the change of 0.3 dB, and the materials used are PEI materials that can resist the temperature of above 120 degrees.

As an all-in-one product, the all-in-one test ensures the performance of the product, which may be more stable than SR4 optical transceiver that adopts MPO jumper with uncertain performance. Compared with SR4 optical transceiver that confirms the quality through optical eye diagram, AOC active optical cable mainly uses the eye diagram to judge the quality of indicators.

QSFP+ SR4 optical transceiver has the DDM monitoring function. When receiving coupling, the ADC value of the receiver can be monitored in real time to determine the optimal coupling. Therefore, SR4 is more superior than AOC in terms of receiving sensitivity.

There is not much difference in the OM3 fibers, but the 40G QSFP+ SR4 optical transceiver provides better performance control. QSFP+SR4 is recommended if you want to achieve a longer distance (> 300 m) transmission.

Active fiber optical cable (AOC) is recommended based on the data connection in the data center, because it provides better wiring consistency and repeatability, and the closed ends are easier to avoid the effects of environmental and vibration oscillations. If there is a failure, it can be replaced directly without the need to carry out a series of end-to-plug tests of 40G QSFP+SR4 optical transceiver and MPO jumper on site, which is more beneficial to save costs.

There are many fiber optic accessories suppliers, but we are one of the best choices for you.



在线联系供应商

至: Sumbexauto
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

CERAMIC FERRULE BLANK
CERAMIC FERRULE BLANK CERAMIC FERRULE BLANK If you want to get more information about ferrule blank, please visit our website. T&S Communications, established ...
MTP/MPO CABLE ASSEMBLIES
MTP/MPO CABLE ASSEMBLIES MTP cable assemblies use MPO or MTP multi-fiber connectors. MTP/MPO Fiber Patch Cord greatly saves space and is very convenient to use. Based on si...
FBG OPTICAL BRAGG GRATTING SENSORS
FBG OPTICAL BRAGG GRATTING SENSORS Being a fiber optic sensor, a FBG sensor has all the advantages usually attributed to these devices, such as low loss relative to the fiber length,...
GRADE B PATCH CORD
GRADE B PATCH CORD T&S grade B patch cord connectoris the patchcordwith the random mating performance of Grade B as IEC-61753-1 defined, more than 97% of maximum ...
40G QSFP+ TO 4SFP+ DAC
40G QSFP+ TO 4SFP+ DAC QSFP+ Direct Attach Cables are compliant with the SFF-8436 specifications. 40g harness cableiscompliant with the SFF-8431, SFF-8432 and SFF-8472 sp...
供应产品

Same products

Steel Fiber For Industrial Floors
Steel Fiber For Industrial Floors 卖方: Tengzhou Star Smith Metal Products Co.,Ltd Steel Fiber For Industrial Floors Steel fiber reinforced concrete industrial building ground ...
Orivision DVI Extender
Orivision DVI Extender 卖方: Nantong ZYDZ Electronic Co., Ltd. Orivision DVI Extender ORIVISION offers a wide selection of products for extending DVI video, aud...
Orivision H.265 1080P@60 IP To SDI Video Decoder With Loop Out
Orivision H.265 1080P@60 IP To SDI Video Decoder With Loop Out 卖方: Nantong ZYDZ Electronic Co., Ltd. Brand: ORIVISION Model: ZY-DS931 Input Interface: LAN Port*1 Output Interface: SDI*2, audio*1 Vid...
The Difference Between Fiber Patch Cord and Fiber Pigtail
The Difference Between Fiber Patch Cord and Fiber Pigtail 卖方: Sumbexauto The Difference Between Fiber Patch Cord and Fiber Pigtail Fiber pigtails patch cordsare cables d...
 The Difference Between 100G QSFP28 Fiber Optical Transceiver and 100G CFP4 Fiber Optical Transceiver
The Difference Between 100G QSFP28 Fiber Optical Transceiver and 100G CFP4 Fiber Optical Transceiver 卖方: Sumbexauto The100g optical transceiveris an optoelectronic device that performs electro-optical and photoele...