FUXI ® ALKYD PAINT

What Is Alkyd Paint Used For?

FUXI ® ALKYD PAINT

Epoxy alkyd paintis mainly composed of alkyd resin. It is currently the most used type of paint. It has the advantages of low price, simple application, low requirements for the applying environment, full and hard coating film, good durability and weather resistance, and good decoration and protection. The disadvantage is that the coating film is not easy to meet higher requirements and is not suitable for high decorative occasions. Alkyd resin paintis mainly used for the coating of general woodware, furniture and home decoration, general metal decoration coating, metal anti-corrosion coating, general machinery, automobiles, instrumentation, industrial equipment, etc.

Types of FUXI ® Alkyd Paint

Alkyd Enamel Paint

Alkyd Antirust Paint(Gray)

Acrylic Alkyd Finish

Fast Dry Alkyd Antirust Primer (Iron Red, Gray)

Alkyd Deck Paint

Alkyd Red Lead Antirust Paint

Alkyd Surface Tolerant Antirust Paint

The Advantages of Alkyd Paint

Good gloss and color retention

Good weather resistance

Dry fast

Single component, easy to apply

Alkyd VSAcrylic

Film formation (or volume solid)

Because the molecular weight of alkyd resin is lower, you can get more alkyd in the tank. The volume solids of a good-gloss alkyd resin is about 55%, while an acrylic resin with the same gloss is about 40%. This means that at the same spread rate, the alkyd resin film is 37.5% thicker than the acrylic resin. On the contrary, under the same film-forming conditions, the spreading rate of alkyd resin will increase by 37.5%.

Bad weather

Alkyd resins and acrylic resins form films through completely different mechanisms. The alkyd resin initially loses its solvent by evaporation during the "stickiness" period, and then cures by the aforementioned catalytic/oxidative reaction. The speed of this reaction depends on the temperature and slows down in the cold. However, when the temperature increases, the reaction rate increases. The damage that may be caused to the film during the low temperature drying process is usually limited to some gloss loss.

However, acrylic resin loses moisture by absorbing or evaporating and then forms a film through physical fusion of plastic particles. A temperature below a certain critical level will cause the particles to become too hard to deform and coalesce into a film. This is especially true when high humidity delays the evaporation process and may enter the colder parts of the night. The lack of film coalescence of acrylic resin is an irreversible phenomenon.

Surface treatment

Acrylic resin is a special material that is carried in an aqueous medium. If these are applied to a porous surface, water will be absorbed preferentially, allowing the vehicle to stay on the surface. If the surface is intact, this is a very ideal condition because it will leave all protective or decorative films in place.

On the other hand, alkyd resins are more permeable to porous surfaces due to their lower molecular weight, which can cause film loss on the surface, but also helps to bond and regulate imperfect surfaces. This does not prevent the need for proper surface treatment, but it does give alkyd resins an advantage on suspicious surfaces.

All in all, where the outer surface needs to be coated, if the surface is intact and the weather conditions are favorable, acrylic will usually provide better performance; if the surface is in doubt, alkyd primer and acrylic are a good system.

Alkyd Paint VS Latex

One significant difference between the alkyd and latex paints is that alkyd is oil-based paint, while latex is water-based.

Adhesion

Both alkyd and latex paint have excellent adhesion. Compared with latex paint, alkyd paint has better adhesion on severely chalked surfaces. In addition, latex paint has higher elasticity than alkyd paint.

Color retention

The latex paint is more resistant to fading and chalking when exposed to the sun, but the alkyd paint is more prone to fading.

Application

When applied, alkyd paints are more difficult than latex paints because they are heavier than latex paints. Latex paint is smoother and easily drags on the surface. Alkyd coatings can be used on most surfaces, but should not be used directly on new plaster or concrete. Latex paint is suitable for wood, vinyl siding, brick, stucco and aluminum siding.

Clean

Alkyd paint can be cleaned with paint thinner, turpentine, etc. solvent removal, while latex paint can be cleaned with water.

FAQ of Alkyd Paint

The alkyd paint is oil or water based?The alkyd paint is oil or water based?

It is oil paint. Namely, alkyd paint is more VOC for the environment than water-based paints. Also, alkyd paints are more likely to spatter than latex or true oil paints.

Why alkyd primer can not match with epoxy paint?Why alkyd primer can not match with epoxy paint?

The alkyd enamel will not dissolve in its original solvent after curing but will dissolve in the strong solvent. If the surface is overcoated with other types of coatings containing strong solvents, the strong solvents in the coating will attack the alkyd resin coating, causing defects such as skinning and wrinkling of the coating.

How does alkyd paint cure?How does alkyd paint cure?

Alkyd paint is a solid paint film formed by the reaction of oxygen in the air and oil in the paint. The oxygen in the air first reacts with the surface paint film to form a solid paint film. So it takes longer for oxygen to enter the wet film below. The thicker the coating, the longer the time. Therefore, the single-pass wet film of alkyd enamel should not be too thick. Too thick will affect the volatilization of the solvent in the wet film below, resulting in solvent retention and blistering. It will also cause the wet film to not be cured well; if there is water mist or water on the surface of the coating before curing, which prevents the contact between oxygen and the coating, it will also prevent the normal curing of the coating.

As a coating manufacturer, we can provide kinds of industrial paint coatingfor sale, if you are interested, please contact us.

Other supplier products

	FUXI ® ACID & ALKALI RESISTANT PAINT	Acid resistant paint coatingsare available in a wide range of formulations, suited to different applications. The most common types are epoxy, phen...
	DRINKING WATER TANK PAINT	Before the 1950s, water tank inside painton ships worldwide were protected by cement slurry. It has proved that the cement slurry is very brittle a...
	Fluorocarbon Finish	Fluorocarbon finishpaint is a two-component self-drying coating, formulated with high-grade fluorocarbon resin, special resin, and main film-formin...
	Water-borne Inorganic Zinc-Rich Anticorrosive Primer	The waterborne inorganic zinc primer coating, like the solvent-based inorganic zinc-rich paint, is rich in metallic zinc powder as an anti-rust pig...
	Chlorinated Rubber Asphalt Paint	Chlorinated Rubber Green Asphalt Paint Chlorinated rubber road marking paintis a one-component chlorinated rubber asphalt paint for woodcomposed...

供应产品

Same products

	Aluminium Garden Ornaments	卖方: LianJiang Metals Company	Aluminium Garden Ornaments Aluminum garden ornamentsare decorative pieces made of aluminum that ...
	蓝翠鸟 水包砂 | 立体仿石 外墙环保涂料	卖方: 中山蓝翠鸟新型环保材料有限公司	产品概述 蓝翠鸟水包砂外墙涂料，融合立体仿石质感与环保水性科技，为建筑塑造坚固而美观的外衣。其丰富的石材肌理与色彩，让外墙具备设计感的同时，也拥有出色的耐久与防护性能。 产品优势 ...
	蓝翠鸟 设计师系列天鹅绒艺术漆 | 微光质感 背景墙涂料	卖方: 中山蓝翠鸟新型环保材料有限公司	产品概述 这款天鹅绒艺术漆是提升空间设计感的秘密武器。它特有的柔光微哑质感，能瞬间让墙面告别平淡，带来低调的内敛奢华。非常适合用于打造客厅主题墙、餐厅背景或工作室墙面，无需复杂装饰，仅凭墙...
	蓝翠鸟免水洗树脂水洗石 | 一刮成型 墙面地面皆宜	卖方: 中山蓝翠鸟新型环保材料有限公司	产品概述 蓝翠鸟免水洗树脂水洗石，是一款革命性的装饰材料，其核心“一刮成型”工艺彻底颠覆了传统水洗石的复杂施工流程。可在墙面或地面快速塑造出坚固、耐磨且富有天然石子肌理...
	铺贴瓷砖更轻松 蓝翠鸟膏品质瓷砖胶 厂家批发	卖方: 中山蓝翠鸟新型环保材料有限公司	核心性能 名称：瓷砖胶 主要材质：水泥、石英砂、聚合物改性剂等 形态：粉状干混材料（加水搅拌成膏状） 规格：20kg / 袋 优势： 1、粘结力强，能有效防止瓷砖、石材出现空鼓、脱落...