MF1K Solid Colors (Basecoat Colors)
MF1K Solid Colors (Basecoat Colors)
Refinish Automotive Paint
Product Name/Model:MF1K Solid Colors (Basecoat Colors)
Characteristic:MF1K Solid Color with excellent leveling property,easy construction,excellentadhesion power and coveraging power,can match all kinds of solid colors, metallic and pearleffect. Mainly applies to intermediate cars, MPV and bus.
|
Substrates |
Well-Sanded, Completely dried and good existing finishes as bellow:A original paint B. Old paint firm C. 1K or2k primer |
|
|
Surface Cleaning |
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sanding with P800-P1000,wash with clean water then keep dry;again with degreaser. |
|
|
MixingRatio |
MF1k Solid Colors |
Thinner |
|
1 |
1 |
|
|
＜15℃ |
MF1k Solid Colors |
60 Fast Thinner |
|
15-30℃ |
MF1k Solid Colors |
61 Standard Thinner |
|
＞30℃ |
MF1k Solid Colors |
62 Slow Thinner |
|
SprayViscosity |
14-16s to drop off, in 4# viscosity cup at 25°C, |
|
|
Re-Treatment |
After spray, allow 10-20 minutes air-drying time,then spray clear coat at once. |
|
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 3-5kg/cm ²Suction Feed: 1.4-1.6mm 3-5kg/cm ² |
|
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 15-20um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends ontemperature and paint film. |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 25℃. |
|
|
Package |
1L×12or3.75L×4 |
|
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. To avolid problems of mottlingorpoor adhesion, the metallic paint film should be 15-25um.
在线联系供应商
Other supplier products
 |
MF-680 Extra Fast Clear Coat | MF-680 Extra Fast Clear Coat. Automotive Paint company Product Name/Model:MF-680 Extra Fast Clear Coat. Characteristic:Extra fast drying clear... |
 |
BYTC15 Extra Fast Clear Coat. | BYTC15 Extra Fast Clear Coat. Auto Coatings Product Name/Model：BYTC15 Extra Fast Clear Coat. Characteristic: Extra fast drying clear coate, high g... |
 |
BYT Clear Coat Series | BYT Clear Coat Series Auto Coatings Product Name/Model：BYT Clear Coat Series Characteristic:1、 BYT518 Clear Coat ：Two- component 518 clear coat wi... |
 |
2K Series Hardener | 2K Series Hardener MARSIDE Series Product Name/Model:2K Series Hardener Characteristic: A series of yellow resistant hardener, designed for for 2K... |
 |
BC1K Solid Colors (Basecoat Colors) | BC1K Solid Colors (Basecoat Colors) Automotive Paints Supplier Product Name/Model:BC1K Solid Colors(Basecoat Colors) Characteristic:BC1K Solid Col... |
Same products
 |
Non-Carbon Epoxy Antistatic Anticorrosive Intermediate Paint | 卖方: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Non-carbon epoxy antistatic anticorrosive intermediate paintis two-component. It has high electri... |
 |
BENZENE-FREE SPRAY PAINT | 卖方: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® Benzene-free Spray Paint is a quick-drying benzene-free thermoplastic acrylic resin aero... |
 |
WINDSHIELD CLEANER | 卖方: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® car window cleaner sprayis a high-performing spray that easily removes dirt, grime, grea... |
 |
PARTS CLEANER | 卖方: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® AUTO PARTS CLEANER SPRAYcan quickly dissolve and remove brake powder, oil stains and res... |
 |
CRYSTAL WAX | 卖方: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® Crystal Wax Car Polishis a high-quality super deep care crystal emulsion made of advance... |
