Powder coating primer containing zinc MT-PZ ALZ55N
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Overview
MT-PZ ALZ55N is a high-performance, zinc-rich epoxy powder primer engineered to deliver superior corrosion protection for mild steel in demanding industrial environments. The primer combines bothcathodic protectionand aphysical barrier effect, creating a robust duplex system that safeguards steel against corrosion, chemical exposure, and mechanical damage.
Formulated with a high zinc content and reinforced with anticorrosive additives, MT-PZ ALZ55N provides conductivity that enhances cathodic protection while simultaneously improving protection in areas prone to scratches or mechanical impact. This primer is intended as abase layer for multi-coat systems, offering long-term durability when paired with compatible topcoats, including epoxy, polyester, super-durable polyester powders, and approved polyurethane liquids.
Designed for critical industrial applications, MT-PZ ALZ55N ensures structural integrity, prolonged service life, and reliable corrosion resistance in moderate to aggressive environments.
Powder Properties
| Property | Specification | Notes |
|---|---|---|
| Chemical Type | Thermosetting Epoxy | Zinc-rich formulation for cathodic protection |
| Appearance | Smooth, free-flowing powder | Ensures uniform application |
| Color | Grey | RAL7012 approximate |
| Recommended Film Thickness | 70–120 µm | Optimal balance between protection and coverage |
| Density | 2.9 ± 0.03 g/cm³ | High density ensures effective barrier |
| Application Method | Corona Electrostatic Spray | Tribo application not recommended |
| Storage Conditions | Dry, cool ≤30°C | Prevents moisture absorption and caking |
| Shelf Life | ≥12 months | From production date under proper storage |
Surface Preparation & Pretreatment
The performance of MT-PZ ALZ55N is highly dependent on substrate preparation. Proper surface treatment ensures excellent adhesion, optimal edge coverage, and maximum corrosion protection.
Mild Steel:Grit or shot blasting to Sa 2.5 in accordance with ISO 8501-1. Surface roughness Rz 35–60 µm / Ra 6–12 µm.
Cast Steel / Electro Zinc Steel:Not recommended due to inconsistent primer adhesion.
Hot-Dip Galvanized Steel or Zinc-Sprayed Surfaces:Use alternative primers; MT-PZ ALZ55N is not designed for these substrates.
Best Practices:
Ensure all surfaces are clean, oil-free, and dry prior to coating.
Remove loose dust and contaminants from blasting before applying the primer.
Application Guidelines
Spraying:Use corona electrostatic spraying. Tribo application is not recommended due to inconsistent film formation.
Fluidizing Air Pressure:1.5 kg/cm² initially, then reduce to 1 kg/cm².
Transport Air Pressure:0.5–0.8 kg/cm².
Voltage:Recommended 65–70 kV for consistent powder deposition.
Curing:Use convection ovens or infrared heaters; object temperature must remain between 110°C and 180°C. Ensure primer is fully gelled before applying topcoat.
Film Thickness:Maintain 70–120 µm for optimal corrosion resistance.
Recycling:Minimum of 70% new powder should be used. Clean gun nozzles every 30 minutes to prevent buildup and ensure uniform coating.
Performance and Benefits
Superior Corrosion Protection:Zinc-rich epoxy ensures galvanic protection for exposed steel areas, enhancing durability even in scratched areas.
Excellent Barrier Properties:Forms a dense, continuous film that resists water, salts, and industrial pollutants.
Edge Coverage:Designed for maximum coverage in corners, welds, and recesses.
Mechanical Strength:Resistant to impact, abrasion, and handling during assembly or transportation.
Environmental Sustainability:Solvent-free, minimal VOC emissions, and recyclable powder.
Over-Coating Flexibility:Compatible with a wide range of epoxy, polyester, and polyurethane topcoats, providing adaptability to multiple industrial and architectural applications.
在线联系供应商
Other supplier products
 |
Red Powder Coatings | Introduction We are a China-based manufacturer specializing in the production and export of a wide range of red series powder coatings, offering v... |
 |
Silver Gray Color Matte Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Powder type Epoxy-Polyester, Polyester Applications Exterior Industrial, ... |
 |
General / Standard Powder Coatings | Introduction Our standard powder coatings are designed for a wide range of applications, including appliances, furniture, automotive parts, metal ... |
 |
Durable polyester powder coatings | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description MT Autobody powder coating isa series of durable polyester powd... |
 |
Functional powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Antibacterial powder coating MT-3015 White matte Thin-coat powder coating MT-M... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
