Gray wrinkle color powder coating

Getaquote

whats/app：+86 132 6275 2056

WEB: std-coatings.com

COLORS AVAILABLE

RAL colors coating powder

Pantone colors

Color-matching regarding customer requirement is available

PHYSICAL PROPERTIES

Specific gravity :1.2 ~1.8g/cm3 up to colors

Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)

Level of liquidity:24 ~27 mm

CURING CONDITIONS

180 °C ~200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters /kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is anon-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

Mechanical property
Testing items	Standards and methods	Inspecting index
Impact strength	GB/T1732-1993. AS3715 2.8	>50kg/cm
Bending resistance	GB/T1185-88. AS1580 402.1. ISO9227	Pass 2-5 millimeters
Adhesion CHECKED TEST	GB/T9286-88.2mm Cross cut, ISO2409	Pass100/100. passes 0levels
Cupdrawing:Erichsen, ISO1520	Erichsen, ISO1520	Pass 3-7 millimeters
Chemical resistance and weather resistance
Salt spray test	GB/T1771-91.500 hours	The cross section of corrosion less than 2MM
Hot and damp resistance test	GB/T,1000 hours	Without air bubbles, loses the light slightly
Acid resistance	10% CH3COOH, 240 hours	Without air bubbles, the surface without damage
Alkali resistance	10% NaOH, 240 hours	Without air bubbles, the surface without damage
Heat resistance	200degree,1 hour	The color change is lower than E=1.5
Solvent resistance	MEK24 hours soaked in solvent-free	Without air bubbles, the surface without damage
Uvioresistant	QUV-313.500 hours	Gloss higher than 80% lower than the Munsell color change level
Water tolerance of	2 hours	No bubble, not falling, losing light

Other supplier products

	Villa Elevator Powder Coating	Introduction Aesthetic and Functional Excellence: The coating provides an aesthetically pleasing and uniform finish with excellent weather resista...
	Thermosetting flat powder coating	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Introduction MT thermosetting flat powder coating adopts advanced polymer f...
	Beige wrinkle color powder coating	Product description COLOR AND GLOSS RANGE Color: Ral colors and customed colors Gloss: High/Semi/Sub/Low/Matt APPLICATION S...
	Wood grain transfer powder coating	Product introduction: Transfer powder coating can form various patterns or patterns on the coating on the substrate through transfer technology. T...
	Cetylpyridinium chloride monohydrate CAS No.6004-24-6	WA：+86 132 6275 2056

供应产品

Same products

	Metallic flat high gloss MT-049/98010	卖方: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
	Pure epoxy powder coating	卖方: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
	Epoxy polyester powder coating	卖方: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
	Pure polyester weather-resistant powder coating Factory Supplier	卖方: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
	Metallic flat semi-gloss Powder Coating MT-049/97003	卖方: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...