.

Polyvinyl acetate powder coating

Getaquote

whats/app:+86 132 6275 2056

WEB: std-coatings.com

Introduction

Brief description

It is made of German and multi-head trees and chemicals such as TGIC or HAA.

Features

Excellent mechanical properties and excellent weather resistance.

Application areas

Applicable to various types of long-term outdoor exposure products such as communication base stations, mechanical equipment, household appliances, architectural aluminum profiles, transportation facilities, stadium facilities, courtyard facilities, etc.

Product series

Provide standard weather resistance and ultra-high weather resistance products; can be made into a variety of gloss and a variety of colors; can be made into flat, sandy, wrinkled, metallic effects and mixed colors; some products are certified by Qualicoat Classl.

Technical parameters

Powder performance

Specific gravity: 1.1~1.8g/cm³

Mechanical properties

Test itemsTest standardsPerformance indicators
Pencil hardness GB/T6739-1996 >=H
Adhesion GB/T9286-1998 Grade 0
Bending GB6742-86 Φ3mm
Impact GB/T1732-93 50kg.cm
Cupping GB9753-88 >6mm


Corrosion resistance

Test itemsTest standardsPerformance indicators
Salt spray resistance GB/T1771-91 No change in coating after 1000 hours, Cross-section single-sided corrosion <2mm
​Moisture and heat resistance GB/T1740-79 >1000 hours slight loss of gloss, >=1 level
Light aging test ASTM G154 QUV 0.78w/m² @340nm 500H Gloss retention ≥80%

Note: The above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, materials, pretreatment, and spraying process.

Application conditions

Pretreatment: phosphating treatment, inscription treatment; Coating: Polyester powder coating is suitable for the following equipment coating: corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying. Curing conditions: 200·C@10 minutes, 1800C@15 minutes, can also be designed according to customer needs.

Packaging

Carton packaging.

Net weight 20kg/box.

Lined with polyethylene plastic bag.

Storage conditions

Store in a dry and ventilated room below 30℃.

Avoid direct sunlight.

Under this condition, the powder can be stably stored for 12 months.

Can be retested after expiration, and can still be used if it meets the requirements.

Safety and health

All raw materials of powder coatings do not contain toxic substances.

No toxic gas will be released during baking.

Avoid inhalation of dust during use.

Operators should wear dust masks.

Minimize long-term contact between skin and powder.

Paint attached to the skin can be washed with soap.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Automotive headlamp reflectors powder coating MT-A1270/MT-HZG04R
Automotive headlamp reflectors powder coating MT-A1270/MT-HZG04R Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product Description The visual effect achieved from the final headlamp reflector is of ...
Gray Series Powder Coating
Gray Series Powder Coating Introduction We manufacture and export a full range of gray tone powder coatings, available in RAL, Pantone, or custom shades – shipped glob...
Powder coating for pipeline anticorrosion
Powder coating for pipeline anticorrosion Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com The service life of the pipeline depends largely on the anti-corrosion method of the st...
Light pole powder
Light pole powder Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction Accurate selection of powder has always been a problem for the powder ...
Powder Coating for Electrostatic Spray Application on Cold Surfaces
Powder Coating for Electrostatic Spray Application on Cold Surfaces Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product Description MT R4-ES HJ601R is a high quality thermosetting epoxy powder coatin...
供应产品

Same products

Metallic flat high gloss  MT-049/98010
Metallic flat high gloss MT-049/98010 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
Pure epoxy powder coating
Pure epoxy powder coating 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
Epoxy polyester powder coating
Epoxy polyester powder coating 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
Pure polyester weather-resistant powder coating Factory Supplier
Pure polyester weather-resistant powder coating Factory Supplier 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
Metallic flat semi-gloss Powder Coating  MT-049/97003
Metallic flat semi-gloss Powder Coating MT-049/97003 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...