4-acryloylmorpholine CAS 5117-12-4
Introduction
CAS NO. 5117-12-4
Molecular formula: C7H11NO
Appearance: Colorless or pale yellow transparent liquid
Content: 98%min
Color code: 30APHA max
packing: 200kg/drum
Capacity: 500mt/Y
Used for UV curable inks, coatings, and adhesives, petroleum cementing agents, and contact lenses
5117-12-4 – Names and Identifiers
| Name | 4-acryloylmorpholine |
| Synonyms | ACMO Acryloylmorpholin ACRYOYL MORPHOLINE N-Acrylylmorpholine Acryloyl Morpholine ACRYLOYL MORPHOLINE N-Acrolylmorpholine N-ACRYLOYLMORPHOLINE 4-acryloylmorpholine 4-ACRYLOYLMORPHOLINE N-acryloyl morpholine 4-(1-oxo-2-propenyl)-Morpholine N’-acetyl-3-methylbenzohydrazide 1-(morpholin-4-yl)prop-2-en-1-one 4-Acryloylmorpholine (stabilized with MEHQ) |
| CAS | 5117-12-4 |
| EINECS | 418-140-1 |
| InChI | InChI=1/C10H12N2O2/c/h3-6H,1-2H3,(H,11,13)(H,12,14) |
| InChIKey | XLPJNCYCZORXHG-UHFFFAOYSA-N |
5117-12-4 – Physico-chemical Properties
| Molecular Formula | C7H11NO2 |
| Molar Mass | 141.17 |
| Density | 1.122g/mLat 25°C(lit.) |
| Melting Point | −35°C(lit.) |
| Boling Point | 158°C 50mm |
| Flash Point | >230°F |
| Water Solubility | 1000g/L at 20℃ |
| Solubility | Soluble in water |
| Vapor Presure | 1.03-1.64Pa at 25-29.9℃ |
| Appearance | Liquid |
| Color | Colorless to yellow |
| BRN | 119302 |
| pKa | -1.08±0.20(Predicted) |
| Storage Condition | 2-8°C |
| Sensitive | Light Sensitive |
| Refractive Index | n20/D 1.512(lit.) |
5117-12-4 – Risk and Safety
| Hazard Symbols | Xn – Harmful |
| Risk Codes | R22 – Harmful if swallowed R41 – Risk of serious damage to eyes R43 – May cause sensitization by skin contact R48/22 – Harmful danger of serious damage to health by prolonged exposure if swallowed. |
| Safety Description | S23 – Do not breathe vapour. S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection. |
| WGK Germany | 2 |
| TSCA | Yes |
| HS Code | 29349990 |
5117-12-4 – Reference Information
| LogP | -0.46 at 20.5-21℃ |
| use | UV curable inks, coatings and adhesives |
在线联系供应商
Other supplier products
 |
Leveling agent STD-2041 | Composition: Polyether modified silicone oil Appearance: light yellow viscous liquid Active ingredient: 100% Solvent: None Application range: ... |
 |
Non Modified Cellulose Ether | Introduction Non Modified Cellulose Ether To improve the workability properties of Portland cement and gypsum based dry mortars, such as plas... |
 |
UV Light Curing Adhesive | Introduction UV curable adhesive is a structural bonding adhesive that solidifies by irradiating UV light. The characteristic of UV curable adhes... |
 |
Automotive Interior – Polyolefin Hot Melt Adhesive | Polyolefin Hot Melt Adhesive in Automotive Interiors: A Comprehensive Overview Polyolefin hot melt adhesives (HMAs) are a vital component in the a... |
 |
CAS 1823-59-2 | Introduction 4.4 ‘-oxybis-phthalic anhydride is a white to white powder organic substance that can be used to make polyimide resins. Applic... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
