Mixed Etherified Melamine Resin
Introduction
This category of products is mainly made by reacting butanol, methanol in a certain proportion with hydroxymethyl melamine. It has the comprehensive advantages of methyl ether and butyl ether resins, namely excellent flexibility, weather resistance, water resistance, chemical resistance, popularity, and adhesion. It can crosslink with alkyd resin, polyester resin, acrylic resin, epoxy resin, polyurethane, and cellulose, and is used to prepare oil-based, water-based, and solvent-free baking paints.
| MT3168 | Colorless, viscous liquid | ≥98 | 2000-4500 | ≤0.1 | – | Strong adhesion, used for automotive baking paint | |
| MT 3130 | Colorless, viscous liquid | ≥96 | 3000-6000 | ≤0.1 | – | Used for high solid content coatings and electrophoretic coatings | |
| MT 3133 | Colorless, viscous liquid | ≥96 | 800-2000 | ≤0.1 | – | Used for high solid content coatings, with good adhesion and flexibility |
Mixed Etherified Melamine Resin: Technical Overview
Mixed etherified melamine resins are versatile crosslinking agents widely used in coatings, adhesives, and composite materials. The following tables present key technical information:
1. Basic Characteristics
| Property | Specification |
|---|---|
| Chemical Composition | Melamine-formaldehyde with mixed alkoxy groups (methoxy/butoxy) |
| Appearance | Colorless to pale yellow viscous liquid |
| Solubility | Soluble in most organic solvents |
| Etherification Degree | 30-50% methoxy, 50-70% butoxy |
| Viscosity (25°C) | 500-3000 mPa·s |
2. Performance Advantages
| Feature | Benefit |
|---|---|
| Curing Flexibility | Wide curing temperature range (100-180°C) |
| Substrate Compatibility | Excellent adhesion to metals, plastics |
| Film Properties | High hardness with good flexibility |
| Storage Stability | 12+ months shelf life at room temperature |
3. Comparison with Other Melamine Resins
| Parameter | Mixed Etherified | Methylated | Butylated |
|---|---|---|---|
| Curing Temperature | Moderate | High | Low |
| Flexibility | Excellent | Poor | Good |
| Solvent Compatibility | Broad | Limited | Broad |
| Cost Efficiency | Balanced | High | Moderate |
4. Typical Applications
| Industry | Application Examples |
|---|---|
| Automotive Coatings | Clearcoats, primer surfacers |
| Industrial Coatings | Appliance finishes, coil coatings |
| Wood Coatings | Furniture varnishes, flooring |
| Adhesives | High-performance bonding systems |
5. Formulation Guidelines
| Component | Function | Recommended % |
|---|---|---|
| Base Resin | Primary film former | 50-70% |
| Mixed Etherified Resin | Crosslinker | 15-30% |
| Catalyst | Cure accelerator | 0.5-2% |
| Additives | Flow modifiers, etc. | 1-5% |
6. Processing Conditions
| Parameter | Recommended Value |
|---|---|
| Mixing Temperature | 25-40°C |
| Curing Temperature | 120-160°C |
| Curing Time | 15-30 minutes |
| Film Thickness | 20-50 μm |
7. Limitations & Solutions
| Challenge | Solution |
|---|---|
| Moisture Sensitivity | Use sealed containers |
| Limited UV Resistance | Combine with UV absorbers |
| Viscosity Control | Adjust with solvents |
在线联系供应商
Other supplier products
 |
CAS 101-54-2 4-ADPA 4-Aminodiphenylamine | Introduction CAS Number: 101-54-2 Molecular Formula: C12H12N2 Molecular Weight: 184.24 Appearance: Purple-black solid or flakes Melting Point: 69&... |
 |
Non Modified Cellulose Ether | Introduction Non Modified Cellulose Ether To improve the workability properties of Portland cement and gypsum based dry mortars, such as plas... |
 |
Coating for Busbar by Electrostatic Spray Application | Product Description MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation of wire and busbars. Designed for electrostatic ... |
 |
CAS 110-12-3 Methyl Isoamyl Ketone (MIAK) | Names and Identifiers Name 5-Methyl-2-hexanone CAS 110-12-3 EINECS 203-737-8 InChI InChI=1/C8H9BrO/c/h1-5,8,10H,6H2/t8-/m... |
 |
Indanthrone Blue CAS 81-77-6 | Introduction TestItem Specification Contofwater%≤ 2.5 Soluble matter in water %≤ 2.0 O... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
