Dispersants STD-58685N
Introduction
Composition: Organic copolymer solution with pigment-friendly groups
Appearance: yellow transparent solution
Active ingredient: 50%
Solvent: Mixed dibasic ester/diethyl formamideSuitable for medium and high polarity systems, good match with commonly used coating resins, good versatility in the coating system
Suitable for medium and high polarity systems, good match with commonly used coating resins, good versatility in the coating system
Dispersants STD-58685N: Technical Profile
| Category | Specifications |
|---|---|
| Product Name | Dispersant STD-58685N |
| Chemical Type | Modified polycarboxylate copolymer |
| Appearance | Clear to slightly hazy viscous liquid |
| Active Content | 45±2% |
| pH Value | 6.5-8.5 (10% aqueous solution) |
| Density (25°C) | 1.08-1.12 g/cm³ |
| Viscosity (25°C) | 300-800 cps |
| Solubility | Fully soluble in water, compatible with glycol ethers |
Key Characteristics
| Property | Performance Features |
|---|---|
| Dispersion Mechanism | Electrosteric stabilization for superior particle separation |
| Thermal Stability | Maintains effectiveness up to 250°C |
| pH Stability | Performs across pH 4-12 |
| Ionic Character | Anionic with nonionic side chains |
| Foam Generation | Ultra-low foaming characteristics |
Primary Applications
| Industry | Performance Benefits |
|---|---|
| Automotive Coatings | Excellent color development in basecoats |
| Industrial Paints | Reduces viscosity in high-solid systems |
| Construction | Improves workability of cementitious systems |
| Paper Coatings | Enhances opacity and brightness |
| Ceramic Processing | Prevents particle settling in slurries |
Technical Advantages
| Advantage | Operational Benefit |
|---|---|
| Universal Compatibility | Works with organic/inorganic pigments |
| Dosage Efficiency | Effective at 0.3-2.0% loading |
| Process Improvement | Reduces milling time by 30-40% |
| Environmental Profile | APEO-free, meets EU Ecolabel criteria |
| Storage Stability | Prevents hard settling in formulations |
Recommended Usage
| Parameter | Guideline |
|---|---|
| Optimal Addition | During pigment pre-mix phase |
| Temperature Range | 10-80°C for incorporation |
| Mixing | High shear recommended |
| Shelf Life | 18 months in original packaging |
| Storage | Keep at 5-30°C, avoid freezing |
Safety & Compliance
| Aspect | Certification Status |
|---|---|
| Toxicology | Non-hazardous per GHS |
| Skin Irritation | Mild (Category 3) |
| Ecotoxicity | Readily biodegradable (>60% in 28 days) |
| Regulatory | REACH registered, TSCA compliant |
| Handling | Standard chemical PPE required |
Performance Comparison
| Test Parameter | STD-58685N | Standard Dispersants |
|---|---|---|
| Dispersion Fineness | <5μm Hegman | Typically 10-15μm |
| Viscosity Reduction | 40-60% improvement | 20-30% improvement |
| Color Strength | 95-100% development | 80-90% development |
| Storage Stability | 6+ months | 3-4 months |
References
Product Technical Data Sheet (Rev. 2024Q2)
European Coatings Journal– “Advanced Dispersant Technology” (2023)
在线联系供应商
Other supplier products
 |
CAS 1823-59-2 | Vinylene carbonate CAS 872-36-6 Purity / Analysis Method >99.0%(HPLC) Molecular Formula / Molecular Weight C16H6O7= 310.22 Ph... |
 |
EPPD CAS 793-24-8,3081-01-4 | Introduction Chemical Name:Mixture of N-(1,3 – Dimethylbutyl)-N’-phenyl-p-phenylenediamine and N-(1,4 – Dimethylpentyl)-N’... |
 |
Styrene CAS 100-42-5 | Introduction Styrene SDEB is a type of styrene produced by catalytic dehydrogenation of ethylbenzene. It is used to manufacture polystyrene, ABS p... |
 |
Methylated Urinary Aldehyde Resin | Introduction Methylated Urinary Aldehyde Resin: Properties and Applications Table 1: Key Characteristics of Methylated Urinary Aldehyde Resin ... |
 |
Coating for Busbar by Electrostatic Spray Application | Product Description MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation of wire and busbars. Designed for electrostatic ... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
