4-acryloylmorpholine CAS 5117-12-4
Introduction
CAS NO. 5117-12-4
Molecular formula: C7H11NO
Appearance: Colorless or pale yellow transparent liquid
Content: 98%min
Color code: 30APHA max
packing: 200kg/drum
Capacity: 500mt/Y
Used for UV curable inks, coatings, and adhesives, petroleum cementing agents, and contact lenses
5117-12-4 – Names and Identifiers
| Name | 4-acryloylmorpholine |
| Synonyms | ACMO Acryloylmorpholin ACRYOYL MORPHOLINE N-Acrylylmorpholine Acryloyl Morpholine ACRYLOYL MORPHOLINE N-Acrolylmorpholine N-ACRYLOYLMORPHOLINE 4-acryloylmorpholine 4-ACRYLOYLMORPHOLINE N-acryloyl morpholine 4-(1-oxo-2-propenyl)-Morpholine N’-acetyl-3-methylbenzohydrazide 1-(morpholin-4-yl)prop-2-en-1-one 4-Acryloylmorpholine (stabilized with MEHQ) |
| CAS | 5117-12-4 |
| EINECS | 418-140-1 |
| InChI | InChI=1/C10H12N2O2/c/h3-6H,1-2H3,(H,11,13)(H,12,14) |
| InChIKey | XLPJNCYCZORXHG-UHFFFAOYSA-N |
5117-12-4 – Physico-chemical Properties
| Molecular Formula | C7H11NO2 |
| Molar Mass | 141.17 |
| Density | 1.122g/mLat 25°C(lit.) |
| Melting Point | −35°C(lit.) |
| Boling Point | 158°C 50mm |
| Flash Point | >230°F |
| Water Solubility | 1000g/L at 20℃ |
| Solubility | Soluble in water |
| Vapor Presure | 1.03-1.64Pa at 25-29.9℃ |
| Appearance | Liquid |
| Color | Colorless to yellow |
| BRN | 119302 |
| pKa | -1.08±0.20(Predicted) |
| Storage Condition | 2-8°C |
| Sensitive | Light Sensitive |
| Refractive Index | n20/D 1.512(lit.) |
5117-12-4 – Risk and Safety
| Hazard Symbols | Xn – Harmful |
| Risk Codes | R22 – Harmful if swallowed R41 – Risk of serious damage to eyes R43 – May cause sensitization by skin contact R48/22 – Harmful danger of serious damage to health by prolonged exposure if swallowed. |
| Safety Description | S23 – Do not breathe vapour. S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection. |
| WGK Germany | 2 |
| TSCA | Yes |
| HS Code | 29349990 |
5117-12-4 – Reference Information
| LogP | -0.46 at 20.5-21℃ |
| use | UV curable inks, coatings and adhesives |
在线联系供应商
Other supplier products
 |
Industrial two-component epoxy adhesive | Epoxy Resin Adhesives: Properties and Applications Table 1: Key Properties of Epoxy Resin Adhesives PropertyTypical ValueSignificance ... |
 |
Isophorone (IPHO) CAS 78-59-1 | Introduction Chemical Name: IPHO, Isophorone, 3,5,5-Trimethyl-2-Cyclohexene-1-One, 1,1,3-Trimethyl-3-cyclohexene-5-one Molecular F... |
 |
Camera adhesive | Introduction With the increasing demand for consumer electronics and the development of autonomous driving in automobiles, the demand for came... |
 |
polymeric isocyanate (MT-44V20) | General Properties and Applications MT44V20 is a liquid, dark brown polymeric isocyanate based on diphenylmethane-4,4′-diisocyanate (MDI) wi... |
 |
Substrate wetting additive STD-204E | Introduction Composition: Non-silicone surfactant mixture Appearance: light yellow transparent liquid Active ingredient: 50% Solvent: ethylene ... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
