polyester poly （MT670 BAC）
Use:
Binder for coating materials
Relevant identified uses of the substance or mixture and uses advised against
Type of product: Mixture
Mixtures
polyester polyol
ca. 80 % in n-butyl acetate
Emergency overview
yellowish, liquid, solvent-like. Flammable liquid and vapour. May cause drowsiness or dizziness
Classification of the substance or mixture
GHS Classification:
Flammable liquids, Category 3 (H226)
Specific target organ toxicity (single exposure), Category 3 (H336) (Narcotic effects)
Mixtures
polyester polyol
ca. 80 % in n-butyl acetate
Hazardous components
n-Butyl acetate
Concentration [wt.-%]: ca. 20
GHS Classification: Flam. Liq. 3 H226 STOT SE 3 H336 (Central nervous system)
Trimethylolpropane
Concentration [wt.-%]: ca. 0.5
GHS Classification: Repr. 2 H361f
Description of first aid measures
General advice: Take off all contaminated clothing immediately.
If inhaled: Take the person into the fresh air and keep him warm, let him rest; if there is difficulty in breathing,
medical advice is required.
In case of skin contact: In case of skin contact wash affected areas thoroughly with soap and plenty of
water. Consult a doctor in the event of a skin reaction.
In case of eye contact: Hold the eyes open and rinse with preferably lukewarm water for a sufficiently long
period of time (at least 10 minutes). Contact an ophthalmologist.
If swallowed: DO NOT induce the patient to vomit, medical advice is required
Precautions for safe handling
Provide sufficient air exchange and/or exhaust in work rooms.
Provided good ventilation and/or local exhaust systems are used, the Workplace Exposure Limit(s) stated in
section 8 should not be exceeded.
Explosion protection required.
The personal protective measures described in section 8 must be observed. The precautions required in the
handling of solvents must be taken. Avoid contact with skin and eyes and the inhalation of vapor.
Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at the end of workday. Keep
working clothes separately. Change contaminated or soaked clothing.
Respiratory protection
Respiratory protection required in insufficiently ventilated working areas and during spraying.
Hand protection
Suitable materials for safety gloves; EN 374:
Laminate glove – PE/EVOH/PE; breakthrough time >=480 min.
In the event of contamination, change protective gloves immediately. Recommendation: contaminated gloves
should be disposed of.
Eye protection
Wear eye/face protection.
Skin and body protection
Wear suitable protective clothing.
在线联系供应商
Other supplier products
 |
Polyester based powder coating White | Product Description MT-MA220G is a polyester based powder coating, formulated without TGIC and is designed for exterior exposure offering excellen... |
 |
hydroxyfunctional polyacrylic dispersion (MT-A-145) | Characterization MT-A-145 is a water-reducible, hydroxyfunctional polyacrylic dispersion.It is suitable for use in combination with aliphatic poly... |
 |
polymeric isocyanate (MT-44V20) | General Properties and Applications MT44V20 is a liquid, dark brown polymeric isocyanate based on diphenylmethane-4,4′-diisocyanate (MDI) wi... |
 |
Leather coloring | Introduction The series liquid colorant products are used in the leather industry for coloring, with strong coloring power, bright and transpa... |
 |
Silicone and modified silane | Introduction Silicone and modified silane are adhesives with moderate adhesive strength, high flexibility, and low hardness, mainly used for bondi... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
