S-TMQ CAS 26780-96-1  TMQ

Introduction

Chemical Name:Polymer of 2,2,4-trimethyl-1,2-dihydroquinoline

CAS NO.:26780-96-1

Product Specification:

Appearance		Amber to Brown Pastilles
Total content of dimer and trimer(HPLC),%	≥	70.0
Isopropyl bis aniline content(HPLC),%	≤	0.20
Content of 4-ADPA,%		80.0-100.0
Heat Loss(55±2°C ),%	≤	0.20
Ash,%	≤	0.20

◆Performance:
-S-TMQ is a high-performance quinoline antioxidant with much higher effective body content than TMQ;
As the content of dimer and trimer in S-TMQ is high, it has excellent heat, oxidative aging and fatigue resistance performance;
Compared with TMQ, S-TMQ has very low content of non-effective body, which has a little impact on the reducibility of insoluble sulfur and can improve the adhesion between rubber and steel wire;
-S-TMQ has low volatility and pollution.

◆Application:
-S-TMQ can be applied to all kinds of rubber products such as tires, rubber tubes, rubber belts, etc.;
-S-TMQ is recommended to be used tire belt, body ply compounds, which can improve cord performance.

◆Packaging:Paper/plastic packages with a net weight of 20kg per package.

◆Transportation Condition:Clear vehicle with ceiling, avoiding sunshine and rain, keeping away from hot source.

26780-96-1 –Physico-chemical Properties

Molecular Formula	C12H15N
Molar Mass	173.25
Density	1.08
Melting Point	72-94°C
Boling Point	>315°C
Flash Point	158.8°C
Water Solubility	<0.1 g/100 mL at 23 ºC
Solubility	<0.1 g/100 mL at 23°C
Vapor Presure	0Pa at 25℃
Appearance	Yellow
Storage Condition	2-8°C(protect from light)
Refractive Index	1.4870 (estimate)
Physical and Chemical Properties	Density 1.08 melting point 72-94°C boiling point> 315°C water solubility <0.1g/100 mL at 23°C
Use	Mainly used as rubber antioxidant, suitable for natural rubber and nitrile, styrene, Ethylene Propylene and chloroprene and other synthetic rubber

Other supplier products

	Camera adhesive	Introduction With the increasing demand for consumer electronics and the development of autonomous driving in automobiles, the demand for came...
	MMA Two-Component Acrylate Adhesive	Introduction 2K-MMA two-component acrylic adhesive is a structural adhesive with fast curing speed, high bonding strength, good toughness, and goo...
	CBS (CZ) CAS 95-33-0 N-cyclohexylbenzothiazole-2-sulphenamide	Introduction Chemical Name:N- cyclohexylbenzothiazole- 2- sulfenamide CAS NO.:95-33-0 Product Specification: Appearance Grayish white to...
	Dimethyl Lauryl/myristyl Amine CAS 84649-84-3	Introduction Chemical Name Dimethyl Lauryl/myristyl Amine Product Category Fatty Tertiary Amine CAS No. 84649-84-3 Content...
	Mixed Etherified Melamine Resin	Introduction This category of products is mainly made by reacting butanol, methanol in a certain proportion with hydroxymethyl melamine. It has th...

供应产品

Same products

	Epoxy/Polyester Powder Coatings	卖方: Standard International Group (HK) Limited	Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ...
	Polyester Clear Powder Coatings	卖方: Standard International Group (HK) Limited	This series of product are made of polyester resin (as hardener) and highly transparentmaterials....
	Acrylic Clear Powder Coatings	卖方: Standard International Group (HK) Limited	Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar...
	Polyurethane Powder Coatings	卖方: Standard International Group (HK) Limited	Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ...
	MDF Powder Coating	卖方: Standard International Group (HK) Limited	Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are...