MBTS (DM) CAS 120-78-5  Accelerator

Introduction

Chemical Name:Dibenzothiazole disulfide

CAS NO.:120-78-5

Product Specification:

Appearance		Grayish white to yellowish powder or particle
Purity,%	≥	95.0
Melting Point(Initial),°C	≥	164.0
Heat Loss,%	≤	0.40
Ash,%	≤	0.50
Residue on sieve(150μm),%	≤	0.10
Free MBT,%	≤	1.0

◆Performance:Siceler MBTS is a thiazole accelerator with significant delayed action, with high vulcanization temperature and high safe processing. The vulcanization speed is relatively slow if used alone, and is usually combined with dithiocarbamates, thiuram, aldehyde amines and guanidine accelerators.

◆Application:Siceler MBTS is used as a universal accelerator for natural rubber, synthetic rubber and reclaimed rubber, and can be used for manufacturing tires, rubber tubes, rubber belt and general industrial rubber products.

◆Packaging:Paper/plastic packages with a net weight of 20kg per package.Or FIBC with a net weight 500kg per package.

◆Transportation Condition:Clear vehicle with ceiling, avoiding sunshine, rain and long-term extrusion，keeping away from hot source.

120-78-5 –Risk and Safety

Hazard Symbols	Xi – Irritant N – Dangerous for the environment
Risk Codes	R31 – Contact with acids liberates toxic gas R43 – May cause sensitization by skin contact R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Safety Description	S36/37 – Wear suitable protective clothing and gloves. S60 – This material and its container must be disposed of as hazardous waste. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets.
UN IDs	UN 3077

120-78-5 –Upstream Downstream Industry

Raw Materials

Aniline Sodium hypochlorite 2-Mercaptobenzothiazole Carbon disulfide Toluene Sulfur(α) Sulfuric acid Chlorine Sodium hydroxide Sodium nitrite Ammonia

Other supplier products

	CAS 98327-87-8	BINAP 1.1′-Binaphthyl-2.2′-diphemyl phosphine CAS 98327-87-8 Product Number B2383 Purity / Analysis Method >97.0%(GC) ...
	Composite materials – modified silane sealant	MT-667is a single component sealant based on silane modified polymer, which solidifies into an elastomer by reacting with moisture and has good adh...
	Indanthrone Blue CAS 81-77-6	Introduction TestItem Specification Contofwater%≤ 2.5 Soluble matter in water %≤ 2.0 O...
	Fully Methylated Melamine-Formaldehyde Resin	Introduction Fully Methylated Melamine-Formaldehyde Resin (FMMF): Overview and Key Properties CategoryDetails Chemical Type Hexametho...
	S-TMQ CAS 26780-96-1  TMQ	Introduction Chemical Name:Polymer of 2,2,4-trimethyl-1,2-dihydroquinoline CAS NO.:26780-96-1 Product Specification: Appearance Amber to...

供应产品

Same products

	Epoxy/Polyester Powder Coatings	卖方: Standard International Group (HK) Limited	Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ...
	Polyester Clear Powder Coatings	卖方: Standard International Group (HK) Limited	This series of product are made of polyester resin (as hardener) and highly transparentmaterials....
	Acrylic Clear Powder Coatings	卖方: Standard International Group (HK) Limited	Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar...
	Polyurethane Powder Coatings	卖方: Standard International Group (HK) Limited	Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ...
	MDF Powder Coating	卖方: Standard International Group (HK) Limited	Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are...