13.56MHz ISO14443, ISO15693 RFID Reader and writer Module JMY607
JMY607 series are RFID reader/writer module with IIC or UART serial ports. JMY607 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability.
- Qualifications:
- • PCD: NXP RC531, RC632, RC400, RC500
- • Working frequency: 13.56MHz
- • RF standard: ISO14443A, ISO14443B, ISO15693
- • Operating distance: 100mm(depending on card and antenna design)
- • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- • Auto detecting card: Supported, default ON
- • EEPROM: 512 Bytes
- • Interface: IIC & UART
- • Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps
- • Max.command length: 511 Bytes
- • Interface level: 3.3V(TTL level; 5V tolerance)
- • Power supply: DC5.0V
- • Power consumption: 50mA
- • Dimension: 70mm×70mm×10mm
- • Weight: about 20g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- • ISP: Supported
- • RoHS: Compliant
Other supplier products
|
|
IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY6801 |
JMY6801 is a RFID read/write module with UART, IIC, RS232C or USB port. JMY6801 has various functions and supports multi ISO/IEC standard of contac... |
|
|
13.56MHz ISO14443, ISO15693 RFID Reader and writer Module JMY607 |
JMY607 series are RFID reader/writer module with IIC or UART serial ports. JMY607 has various functions and supports multi ISO/IEC standard of cont... |
|
|
usb hid interface hf 13.56mhz rfid reader - mr761 |
MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and outputs the data b... |
|
|
3 SAM slots hf 13.56mhz rfid reader/writer - MR790 |
MR790 series, based on NXP PCD or compatible PCD, is the high performance USB PC/SC interface desktop reader. The reader supports series IC cards a... |
|
|
MCU ARM7 HF RFID Reader/Writer Module JMY610 |
JMY610 series are RFID reader/writer module with UART and IIC serial ports. JMY610 has various functions and supports multi ISO/IEC standard of con... |
供应产品
Same products
