Development System of BMC Rotor Mould
At present, in the development process of BMC mold, the BMC material is thermosetting resin. In the process of mold heating and curing, because of the expansion performance of BMC compositematerial, the pressure in the mold cavity suddenly increases, which makes it difficult to demould the BMCcompoundproducts, and the products are difficult to separate from the mold. Especially some products with long straight surface can not separate from the mold, resulting in die scrap and product development failure.
The BMC Rotor Mold can successfully complete the production process. Compared with the existing technology, it has the following advantages: there is a long straight surface product in the BMC rotor moulding, so it can not be separated from the mold, and it can be used when it can not set a large demoulding slope on the product surface. In the process of mold locking, the lock insert is locked up and down through the lock surface, so that the insert will have a fully fitted balance state, and the fit between the insert and the middle sleeve plate will leave a large space for fit clearance, which effectively prevents the die expansion during the injection molding process. When opening the die, the lock surface is removed and the insert is peeled off from the product quickly, so that the ejection production process can be completed smoothly and the stability of the whole die can be further improved.
在线联系供应商
Other supplier products
 |
BMC/SMC Products | BMC/SMC Products Description: BMC, SMCthermosetting plastic products are produced by BMC and SMC plastic molding process. What is smc plastic？SM... |
 |
BMC, SMC, GRP, GFK Ceiling | Aobang composite ceiling is divided into: BMC ceiling, SMC ceiling, GRP ceiling, GFK Ceiling. The ceiling materials have been developed for more t... |
 |
SMC Cable Braket Moulding | Mainly for pressure molding, the cavity pressure should be considered as small as possible when designing the parting surface. The exhaust should b... |
 |
Principle Analysis of Over Moulding Technology for Injection Mold | In the past 10 years, over mouldingtechnology has completely changed the aesthetic standards, design ideas and functional requirements of consumer ... |
 |
Flange Molding | Flange Molding Flanged joint is the main connection method in pipeline construction. Compared to thermoplastic, thermoset composite can be reproce... |
Same products
 |
Plastic Injection Lightweight Pallet Mould | 卖方: Zhejiang Huaqi Information Technology Co., LTD | Discover the Pallet Mould, a game-changer in the world of logistics and material handling. Our Pa... |
|
|
Flange Molding | 卖方: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | Flange Molding Flanged joint is the main connection method in pipeline construction. Compared to... |
 |
Injection Mold Manufacturing | 卖方: HANKING MOULD ENGINEERING LTD. | HanKing Mouldhas the advantages of low labor cost, short mold manufacturing lead time, excellent ... |
 |
Car Seat Mould for Kids | 卖方: Green Vitality Industry Co., Limited | Child safety seats are seats specially designed to protect children from injury or death in a col... |
 |
Industrial Plastic Injection Mold | 卖方: Green Vitality Industry Co., Limited | The injection molding part is replacing metal products in many fields of industrial applications ... |
