.

Car Light Mould

The car light mould plays a vital role in illuminating vehicles, serving as the eyes of cars. It encompasses all the lighting systems employed in automobiles. The design and production of auto lamp mouldnecessitate meticulous attention due to the exacting requirements of automobile light appearance. Transparent and electroplated components constitute several critical parts of these lights. The lamp itself stands out as the most demanding element in the car's aesthetic. The front and rear headlights represent the primary illumination sources for most cars. Lighting configurations differ across various car series, while even within the same series, variations exist based on height configuration. The key components comprising the front and rear lights of a car include left and right lenses, decorative frames, lamp housings, reflectors, among others.

Car Light Mould Appearance Requirements

Lens (Material: Transparent PC): Steel CAV / COR: NAK80 or S136H (HRC33-37), the hardness of the cavity and core is staggered. The product is highly polished, can't pass the whetstone, save the mold to 1000# sandpaper and then polish.

The decorative frame ( Material PBT ): Mold Steel: CAV: NAK80 or S136H (HRC33-37), COR: forged steel HRC31-35, the product is highly polished, can not pass whetstone save the mold to 1000# sandpaper and then polish. The cavity side ( reflective surface) can not be welded.

Reflector (Material BMC): The cavity and core are made of 8407 steel (to achieve a high polishing effect), the cavity steel is HRC46-50, and the core steel is HRC44-48. The cavity side (reflecting surface) is high polished, and can not pass the whetstone, save the mold to 1000# sandpaper and then polish, the core side is generally 600# polished.

Car Light Mould Technology Summary

Plastic features: transparent color, high requirements for the appearance surface, no spots/gate/marks, no bubbles/ fog halo/shrinkage mark/ welding lines, and other forming defects.

In view of the plastic color transparent, the use of an ordinary runner can avoid the plastic color difference, improve transparency, coupled with the plastic surface is not allowed to have gate marks, so use the side gate gating system.

Car light mould adopts the combined cooling system of "vertical cooling water pipe, inclined cooling lines, and splice water well", and the waterway is arranged along the cavity, effectively ensuring the precision of the plastic parts and the labor productivity of the mold. The plastic parts are ejected out by an ejector block, which is not only stable but also leaves no influence on the appearance of the product.

In the molding of transparent mold, the design of the exhaust system is very important, such as poor exhaust, will seriously affect the quality of plastic parts, in view of the product material for PC, exhaust front-end design for 0.02mm, around the product according to CAE analysis of reasonable design exhaust, reduce the bubble or air trapping caused by local burns and other problems during injection molding.

For more information about plastics molders, please feel free to contact us!



在线联系供应商

至: Green Vitality Industry Co., Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Electronics Mold
Electronics Mold Consumer electronics is very popular in our daily life. It consists of many different plastic parts, pcb boards, wires, battery and some metal part...
Injection Mold & Molding Parts Solution
Injection Mold & Molding Parts Solution Green Vitality Industry is a full-service mold manufacturer specializing in plastic injection mold design & engineering support, injection mold...
Fan Mold
Fan Mold If the weight of each fan blade is not balanced, large vibration, high noise, and large wear of the rotating shaft will occur during high-speed rot...
Industrial Plastic Injection Mold
Industrial Plastic Injection Mold Plastic Mould Industry The industrial plastic injection moldis replacing metal products in many fields of industrial applications to meet the requ...
Mouse Mold
Mouse Mold One computer mouse usually includes these plastic parts: a bottom shell, an upper cover, a middle cover, a wheel, a base of wheel, a frame which co...
供应产品

Same products

Flange Molding
Flange Molding 卖方: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD Flange Molding Flanged joint is the main connection method in pipeline construction. Compared to...
Injection Mold Manufacturing
Injection Mold Manufacturing 卖方: HANKING MOULD ENGINEERING LTD. HanKing Mouldhas the advantages of low labor cost, short mold manufacturing lead time, excellent ...
Car Seat Mould for Kids
Car Seat Mould for Kids 卖方: Green Vitality Industry Co., Limited Child safety seats are seats specially designed to protect children from injury or death in a col...
Industrial Plastic Injection Mold
Industrial Plastic Injection Mold 卖方: Green Vitality Industry Co., Limited The injection molding part is replacing metal products in many fields of industrial applications ...
Plastic Enclosure Mold For Electronic Device
Plastic Enclosure Mold For Electronic Device 卖方: Green Vitality Industry Co., Limited In a Lego game, you will hold the laser, sit on the device, and shoot various targets. Since this...