8" SCH120 SMLS STEEL PIPE AS PER API 5L PSL1 X52 WITH EXTERNAL 3LPE COATING AS PER DIN30670
China manufacturer of 8" SCH120SMLS STEEL PIPEAS PER API 5L PSL1 X52 WITH EXTERNAL 3LPE COATING AS PER DIN30670
Standard: API 5L-2009 ISO 3183-2007 DIN 30670 ( Coating)
Steel Grades: Gr. B X42 X46 X52 X56 X60 X65 X70L245 L290 L320 L360 L390 L415 L450 L480
Size Range: OD:1/2” TO 36”. WT:3mm To 45mm
Coating Thickness: 2mm- 5mm
Manufacturing Process : Hot Rolled / ERW/LSAW
Application:The external coating is mainly used for anti-corrosion protection for liquid pipes before burying.Such pipes has been widely used in rugged environment
Packing: External Black Painting ,Both Side With End Caps, In Bundles by Steel Strips,Covered by Waterproof.
| Nominal Size of Pipe | Minimum Thickness of Normal(n)Coating ,in mm |
| Up to DN100 | 1.8 |
| Over DN100 up to DN250 | 2.0 |
| Over DN250 to Below DN500 | 2.2 |
| From DN500 to Below DN800 | 2.5 |
| From DN800 | 3.0 |
| The minimum coating thickness shall be 0.7mm greater (reinforced(v)type)where coatings will be subjected to particularly high mechanical stress. Along any 1m length of pipe,the coating thickness maybe up to 10% less than the minimum required,provded the thinner area does not cover more than 5cm2 |
|
在线联系供应商
Other supplier products
 |
ASTM A106 GR.B 3LPE Pipe | China ASTM A106 GR B Pipe Supplier: Carbon Steel ASTM A106 GR.B 3LPE, 3LPP, FBE Pipes, ASME B36.10 Design, Hot Rolled, DN200, SCH 40. Product:ASTM... |
 |
ANSI DIN Standard A105 Carbon Steel Plate | China manufacturer of ANSI DIN Standard A105 Carbon Steel Plate Flat Face Pipe Slip On Flange Class 300 DN200 Manufacturing Method: ForgedPressure:... |
 |
API 5L GR.B Psl1 LASW ERW Spiral Welded Steel Pipe | China Manufacturer of API 5L GR.B Psl1 LASW ERW Spiral Welded Steel Pipe Product Name:Welded Steel PipeLength:5.8-12mSpecification::1/2"-72"Inspect... |
 |
Cold Drawn ASTM A312 Seamless Stainless Steel Round Tube/Pipe | China Manufacturer of Cold Drawn ASTM A312 Seamless Stainless Steel Round Tube/Pipe Standards: ASTM(ASME) (SA)A312/213/376 etcManufacturing method... |
 |
20 INCHWELD NECK FLANGE 900# RTJ | China manufacturer of 32INCH FLANGE WELD NECK 900# RTJ, SCH 37 MM, ASTM A105, 63 AARH, ASME B16.47-A Standard:ASME B16.47Material:Carbon steel: AS... |
Same products
 |
Seamless pipe | 卖方: Eastern Steel Manufacturing Co.,Ltd | Seamless pipe is a long steel strip with a hollow cross-section and no seams around it. &zw... |
 |
Seamless Steel Pipe | 卖方: Shandong Xin Jiyuan Special Steel Tube Co., Ltd | Seamless steel pipeis perforated by the whole round steel,and the steel pipe with no weld on the ... |
 |
tool steel manufacturer | 卖方: 0000 | tool steel manufacturer Tool Steel is a high-quality steel specifically designed for use in... |
 |
galvanized coil | 卖方: Hunter Special Steel Company Limited | galvanized coil Hot Dipped Galvanized Steel Coils refers to the process of applying a prote... |
 |
Cold Rolled Square And Rectangular Tubes | 卖方: Tianjin Muchang Materials Imp.& Exp. Corp | Cold rolled black square and rectangular pipesare the precise choice for modern engineering and m... |
