Fiberglass Silicone Rubber Sleeving
500°F/260°CContinuous Exposure: Higher Intermittent
Fiberglass Silicone Rubber Sleeving
Aerospace AS1072 Grade Fire Sleeve was specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.
Thermo Fire Braided Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Sheds splash immediately
Fiberglass Silicone Rubber Sleeving withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.
Withstands intense radiant heat and flame
silicone rubber fiberglass Hydraulic Hose Protectors will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.
Aerospace AS1072 Grade Fire Sleeve is constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.
Protect your personnel and cut your energy loss
Aerospace AS1072 Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.
ProudlyMadeByBSTThermalProtectionProductsCo.,Ltd
| Inside diameter - mm | Inside diameter tolerance -mm | Thickness and tolerance - mm |
| 4-10 | ± 0.3 | 3.0± 0.2 |
| 12-18 | ± 0.4 | 3.5± 0.3 |
| 20-32 | ± 0.8 | 4.0± 0.4 |
| 35-55 | ± 1.0 | 4.3 ± 0.5 |
| 60-100 | ± 1.0 | 4.5 ± 0.5 |
| 105-150 | ± 1.0 | 5.5± 0.5 |
|
Thermo Fire Braided Sleeve- Quick Facts | |
|---|---|
|
Custom colours available by special order. |
|
|
Continuous operating temp: |
500°F (260°C) |
|
Max short term exposure: |
3000°F (1650°C) |
|
Molten splash resistance: |
Outstanding |
|
Flame resistance: |
Very good |
|
Abrasion resistance: |
Very good |
|
Flexibility: |
Outstanding |
|
Water and oil resistance: |
Outstanding |
在线联系供应商
Other supplier products
 |
high temperature basalt sleeve | This basalt fiber braided sleeveis made by texturized basalt yarns trap greater amounts of air and demonstrates better insulation properties and gr... |
 |
Custom Sewn Removable Blankets | Insulock Thermocoversis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In particular, a... |
 |
fiberglass fire sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent fiberglass fire sleeve fiberglass fire sleeveis designed to protect hoses,wires ... |
 |
Titanium Exhaust Wrap | TheLAVA Exhaust Wrapis constructed from fragmentized lava rock that is extruded into the fibers to create a heat wrap that will give you strength a... |
 |
耐高温保护套管 | 耐高温保护套管种类 1.管筒式耐高温保护套管 一般适合保护较短或较平直的的管线，电缆保护，汽车线束，发电机组中常用，安装后牢靠，不易拆卸，密封，绝缘，隔热，防潮的效果较好。 2.缠绕式耐高温套管 主要用于阀门，弯曲管道等不规则被保护物的高温防护，缠绕方便，也适用于户外高温管道，如天然气... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | 卖方: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | 卖方: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | 卖方: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | 卖方: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
