drawing customized 300 ton bridge building beam launcher construction to move girder
300 ton bridge building beam launcher construction is used in the erection of precast beam bridges for span by span method of construction for precast beam girders like T beam,U beam, etc. This self beam launcher is suitable for bridge construction over river,valley or highway and so on.
300 ton bridge building beam launcher construction is suitable for the construction of bridge for roads, railways and other bridge erection construction site. Its main function is to lift the prefabricated beams, then transported onto the prefabricated pier. It has big difference from the general cranes. It requests high security.
1. Electric parts of 300 ton bridge building beam launcher construction are packed by high quality plywood crate, to reduce distortion in conveying;
2. Main beams, end beams and electric hoist are packed by plastic woven cloth. It can reduce abrasion when transport.
Delivery:
1. If the size of whole crane are suitable for container ship, usually by container;
2. If the size is too big, usually by bulk ship or by container after truncation;
3. Transport ways are based on reducing cost for you and keep the crane performance!
1. What's the information should I provide for 300 ton bridge building beam launcher construction when inquiry?
a: Lift capacity b: Lift height c: Span d: Power source f:Working environment.
More details, more better. If you have the drawing will be very better.
2. Operating methods for selection?
A: Pendent controller with push buttons.B: Remote control with push buttons
C: Cabin control with joystick.
3. Can you provide various lifting tools?
Sure, we can provide any tools other specials you need, please tell us it when enquiry.
4. How to install the crane?
Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country.
5. Safety device
Overload limiter, Limit Switch (lifting and traveling), Interlock protection device, Buffer, Overhaul cage, Rail clear plate, Protective cover, Bus bar preventer plate, Anticollision device, Main isolating switch, Emergency stop system, Motor overload protection, and so on.
在线联系供应商
Other supplier products
 |
桥梁施工900吨架空活动脚手架系统 | 900吨高架活动脚手架系统是一种用于现浇混凝土桥梁施工的施工机械。由于其施工质量高、操作方便、造价低等特点，被广泛应用于公路、铁路连续桥梁施工中，被认为是一种最先进的施工方法。桥梁施工设备主要由支腿、桁架、内外框架和吊装系统组成。对模板行走系统的结构构件进行了优化配重设计。可移动脚手架系统可设... |
 |
质量优良的3吨型电动单梁车间起重机 | LD型电动单梁架空机结构合理，整机刚性强，可与电动葫芦配套使用。起重能力1-20t，工位A3-A5，工作温度-25-40C。该起重机可广泛应用于工厂、仓库、货场等不同场所。根据不同用户的需要，给出了地面控制和舱室控制两种工作方式。 LD电动单梁高架起重机规格: 1.容量:1-20t 2.时间:... |
|
|
重质5吨单梁门式起重机，配有CD启闭机 | 重质5吨单梁门式起重机采用CD型提升机，广泛应用于室外大型作业场所的物料提升作业。无需安装钢立柱;因此，采用CD提升机的5吨重单梁门式起重机不会占用太多的地面空间。 单梁龙门起重机一般可分为单梁箱梁龙门起重机、桁架式龙门起重机和半龙门起重机三种。 重质5吨单梁门式起重机，配有CD启闭机 采用重... |
|
|
单梁龙门起重机10吨带电动葫芦 | 单梁龙门起重机10吨带电动葫芦，广泛应用于户外大型作业场所的物料搬运。无需安装钢立柱;因此，10吨单梁龙门起重机配电动葫芦不会占用太多的地面空间。 单梁龙门起重机一般可分为单梁箱梁龙门起重机、桁架式龙门起重机和半龙门起重机三种。 单梁10吨电动葫芦龙门起重机与CD MD型电动葫芦配套使用。... |
 |
定制电动葫芦移动式半龙门起重机 | 产品描述 电动葫芦移动式半龙门起重机与CD MD电动葫芦配套使用。它是一种带轨道的中小型起重机。起重能力3-32吨，跨度12-20米，工作环境温度- 20c -+40C。本产品为通用起重机。主要用于户外场所和仓库装卸搬运物料。本产品有地面控制和室内控制两种方法。关于我们 我们的优势 在华大重工... |
Same products
|
|
AEMK 588 Loader | 卖方: 烟台欣祥国际贸易有限公司 | 驾驶室高度：2670毫米 整车尺寸（长*宽*高）：5700*2000*2670毫米 前轮配重：4250毫米 轴距：2500毫米 离地间隙：480毫米 最大卸料高度：3500毫米 最大... |
 |
Quick Change Worktable | 卖方: Nextas Co.,Ltd | Quick Change Worktable Zero Point Pneumatic Chuck Zero Point Positioning Datum System NE... |
 |
Self Centering Vise | 卖方: Nextas Co.,Ltd | Self Centering Vise Key Advantages High precision: repeatability as tight as ≤ 0.005 mm ... |
 |
BDS Positioning Chuck | 卖方: Nextas Co.,Ltd | BDS Positioning Chuck Self Centering Vise Self-centering vise is a type of workholding tool that... |
 |
Quick Change Pallet System | 卖方: Nextas Co.,Ltd | Quick Change Pallet System Quick Change Pallet System Quick Change Pallet System delivers m... |
