Shale Shaker
供应产品
Shale Shaker
SolidControlEquipment
Linear motion shale shaker is the primary processing equipment of solid control system, it is used for separating the large drilling cuttings from drilling fluid, and it plays an important role in protecting drilling fluid performance.
( 1) Adopt Italy OLI brand motors which have the advantages of high strength vibration, large screening area, adjustable screen box angle, little noise and high efficiency.
(2) Heat treatment of the complete shaker deck.Surface painting with heavy anticorrosion to extend the service life of shale shaker.
(3) Use the full adhesive hookstrip rigidity screen or steel frame screen, the fixed tensioning plate can make to replace screen more convenient and easier and also can replaced into many kinds of screens.
(4) Reasonable designing the cofferdam height of shale shaker logging tank can make mud buffer is uniformity flow, reduce direct impact on screen and effective extend the screen service life.
(5) We can manufacture dual or thribble shale shaker according to clients' requirements.
Linear Motion Shale Shaker Parameters
|
Model |
DCZS850-2K |
DCZS700-3G |
DCZS630-3K |
DCZS830-3G |
DCZS585-4K |
|
Vibrating Mode |
Linear Motion |
||||
|
Motor Power |
2×1.5kW |
2×1.5kW |
2×1.5kW |
2×1.72kW |
2×1.72kW |
|
Vibrating Strength |
≤7.0G |
||||
|
Amplitude |
5~6mm |
||||
|
Treating Capacity |
80 m3/h352GPM |
110 m3/h484GPM |
120 m3/h528GPM |
130 m3/h572GPM |
130 m3/h572GPM |
|
Deck Adjustment |
-1°~5° |
||||
|
Electric Specs |
380V/50HZ or 460V/60HZ or Customized |
||||
|
EX Standards |
Ex dⅡBT4 |
||||
|
Screen Qty |
2 panel |
3 panel |
3 panel |
3 panel |
4 panel |
|
Screen Specification |
850×1250mm40~200 mesh |
700×1050mm40~200 mesh |
630×1250mm40~200 mesh |
830×1080mm40~200 mesh |
585×1165mm40~200 mesh |
|
Screen Area |
|
||||
|
Screen Type |
Steel Frame |
Hookstrip |
Steel Frame |
Hookstrip |
Steel Frame |
|
Dimension |
2260×1860×1380mm |
2700×1620×1500mm |
2510×1720×1500mm |
3310×1650×1580mm |
2900×1700×1500mm |
|
Weight |
1280kg |
1580kg |
1680kg |
1750kg |
1800kg |
|
Remark |
Specific gravity of mud treated by shale shaker is 1.2g/cm3,viscosity:45S,API 40 |
||||
在线联系供应商
Other supplier products
| Decanter Centrifuge | Decanter Centrifuge SolidControlEquipment Drilling fluid centrifuge is used for recovering barites, removing small solid particles, reducing soli... | |
| Desilter | Desilter SolidControlEquipment Desilter is the third class solid control equipmentin solid control system,it is used to separate the so... | |
| Diesel Tank | Diesel Tank SolidControlEquipment Oil tank is the major corollary equipment in oilfield drilling rig, it is mainly used to store and provide fuel... | |
| Mud Gas Separator | Mud Gas Separator SolidControlEquipment Constant pressure drilling fluid mud gas separator is a specialized equipment used for primary ... | |
| Vacuum Degasser | Vacuum Degasser SolidControlEquipment Vacuum degasser can quickly eliminate the invaded gas from the drilling mud , restore drilling mud proporti... |
Same products
| AEMK 588 Loader | 卖方: 烟台欣祥国际贸易有限公司 | 驾驶室高度:2670毫米 整车尺寸(长*宽*高):5700*2000*2670毫米 前轮配重:4250毫米 轴距:2500毫米 离地间隙:480毫米 最大卸料高度:3500毫米 最大... | |
| Quick Change Worktable | 卖方: Nextas Co.,Ltd | Quick Change Worktable Zero Point Pneumatic Chuck Zero Point Positioning Datum System NE... | |
| Self Centering Vise | 卖方: Nextas Co.,Ltd | Self Centering Vise Key Advantages High precision: repeatability as tight as ≤ 0.005 mm ... | |
| BDS Positioning Chuck | 卖方: Nextas Co.,Ltd | BDS Positioning Chuck Self Centering Vise Self-centering vise is a type of workholding tool that... | |
| Quick Change Pallet System | 卖方: Nextas Co.,Ltd | Quick Change Pallet System Quick Change Pallet System Quick Change Pallet System delivers m... |
















