ROLLING SHUTTER SLATS ROLL FORMING MACHINE
How to select Rolling Shutter Slats Roll Forming Machine
l In the selection of materials should consider more lightweight, durable materials, so that even in special circumstances can play a higher security.
l The purchase of rolling door motor is also an important part. Remember not to feel that the lifting force is enough, because the bearing capacity of the rolling door motor will gradually reduce the actual lifting effect with time, so try to select materials as much as possible. It must exceed the actual lifting force of the curtain.
l Observe whether the structure of the electric rolling door is precise, the degree of lubrication is good or bad, and the heat dissipation of the good electric rolling door is compared, the full gear is rotated, no chain, no belt, and thus the overall life of the rolling door movement is enhanced.
l Brand is also an indispensable factor. In order to reduce the production cost, many small processing plants simply reduce the material of the accessories.
There is no way to guarantee the quality of the installation, and the maintenance is also the same, so it's better to consider the brand of the company when purchasing the rolling shutter slats roll forming machine.
BOSJ Rolling Shutter Slats Roll Forming Machine's Advantages:
l When the shutter door is opened and closed, check whether there is any pile of material. Especially the fire shutter door is linked with the fire protection system. The fire shutter door is often damaged or tilted due to improper operation.
l Ordinary electric rolling shutters should also pay special attention to the fact that the curtains should be on the scene at the same time as the curtains are opened and closed. In the unlikely event that the curtains are tilted or the track is stuck, the curtains should be stopped and opened in time so as not to cause greater damage to the motor and the curtain. hurt.
l While the curtain is opening and closing, pedestrians and running are strictly forbidden, because the curtains are connected by the connecting piece when the curtain is opened and closed, and there are few unsafe factors in the motor and the transmission shaft. Therefore, when the curtain is started, it should try not to run.
BOSJ established in 2004, as a professional china roll former manufacturer, BOSJ has won a worldwide reputation in this field. Our products have broad markets in Southeast Asia, India, North and South America, Western Asia, Russia, and Australia. We provide door shutter roll forming machine, automatic rolling shutter machine, shutter door roll forming machine, rolling shutter machine, shutter machine and etc. Want to know more, please contact us.
在线联系供应商
Other supplier products
 |
GALVANIZED STEEL SILO UPRIGHT DOUBLE LAYER ROLL FORMING MACHINEE | The development of steel silo roll forming machine and steel silo has a history of more than 100 years, from riveting warehouse, welding warehous... |
 |
GUARDRAIL ROLL FORMING MACHINE | A highway guardrail roll forming machineor a crash guard roll forming machine produced by the most common profile wave guardrail used in highway co... |
 |
STEEL ROLL FORMING MACHINE | China roll forming machine manufacturer-BOSJ, always offer what's best for you. Overview of Steel Roll Forming Machine Cold forming is a new techn... |
 |
HIGHWAY GUARDRAIL ROLL C PURLIN FORMING MACHINEE | Cold roll forming technology has been widely used for its energy saving, environmental protection and high efficiency. Highway Guardrail machinepro... |
 |
PANEL ROLL FORMING MACHINE | Overview ofPanel Roll Forming Machine The color plate produced by discharging, forming and post-forming cutting has a flat appearance, uniform pai... |
Same products
 |
AEMK 588 Loader | 卖方: 烟台欣祥国际贸易有限公司 | 驾驶室高度：2670毫米 整车尺寸（长*宽*高）：5700*2000*2670毫米 前轮配重：4250毫米 轴距：2500毫米 离地间隙：480毫米 最大卸料高度：3500毫米 最大... |
 |
Quick Change Worktable | 卖方: Nextas Co.,Ltd | Quick Change Worktable Zero Point Pneumatic Chuck Zero Point Positioning Datum System NE... |
 |
Self Centering Vise | 卖方: Nextas Co.,Ltd | Self Centering Vise Key Advantages High precision: repeatability as tight as ≤ 0.005 mm ... |
 |
BDS Positioning Chuck | 卖方: Nextas Co.,Ltd | BDS Positioning Chuck Self Centering Vise Self-centering vise is a type of workholding tool that... |
 |
Quick Change Pallet System | 卖方: Nextas Co.,Ltd | Quick Change Pallet System Quick Change Pallet System Quick Change Pallet System delivers m... |
