Rigid Polyurethane Foam Cutting Machine

Characteristics of rigid polyurethane foam cutting machine:1. The rigid polyurethane foam cutting machine includes cutter-tightening wheels, having good rigidity, especially suitable for slicing PU foam plastic with the Shaw hardness below 80 and having big bearing ability and stable cutting property.2. Square steel worktable with smooth surface and strength structure is adopted to mate with rigid wheel case and to guarantee stability and accuracy in the process of cutting.3. Slicing tool employs a wide strip cutter. The cutter produces no flying dust and ensures smoothness and good parallelism of slicing surface, yet leaving no cutting trace.4. Operations of the band cutter type rigid polyurethane foam cutting machine can be completed by means of program-controlling, which has advantages of precisely controlling cutter height, easily setting computer, owning photoelectric display function and having convenient operating modes of both auto and manual.

Structure and operating principle:Rigid polyurethane foam cutting machine is consisted of cutter-tightening wheel, cutter raising and lowering mechanism, worktable assembly and computer controlling system and so on.

It works as follows: Slicing thickness and cutter raising height shall be predefined, then cutter raising and lowering mechanism goes into automatic working state and the worktable carries foam to be sliced by the strip cutter on high-speed rotating wheels. After slicing is finished, computer will sent out a signal and cutter shall be automatically raised to preset height and worktable will return to original place. At this time the cutter, deducting the raised height, will be lowered to the appointed height and prepare for another cutting.

Application of rigid polyurethane foam cutting machine:The machine is applicable to slice rigid (i.e. for vehicle ceiling use, using band cutter) or half-rigid thermoplastic PU products and PU rigid-foam with thick facings (i.e. insulating panel, using sawtooth cutter).

Main technical parameters:

Size of foam that can be cut (Length × Width × Height) mm	2000×1600×12003000×1600×1200
Dimension of worktable(Length × Width)	2500×1700 mm3500×1700 mm
Linear speed of worktable moving	0~10 m/min
Linear speed of strip cutter moving	about 14 m/s
Slicing thickness	3 mm~10 mm

Other supplier products

	EVA Foam Cutting Machine	Introduction:EVA foam cutting machine is applicable to cut all kinds of flexible material like EVA and rigid foam. It is widely used in the produ...
	High Temperature Elastomer Dispensing Machine	Elastomer injection machine of high temperature type Detail Info: The high temperature elastomer dispensing machine (polyurethane dispensing mac...
	PU Filter End Cap Production Line	Description: PU filter end cap production line includes R2Y type polyurethane injection machine, RXY type polyurethane injection equipment for e...
	PU Sandwich Door Production Line	Introduction of PU sandwich door production line: The PU sandwich door production line is used to produce sandwich panels for making automatic d...
	Sandwich Panel Line	Delivery and Payment:Our production cycle of the product is 6 months. 30% deposit payment, 65% before delivery, 5% of the balance. If you need, p...

供应产品

Same products

	1435mm 数显轨距尺	卖方: 武汉联科瑞际轨道设备有限公司	铁路数显轨距尺主要用于铁路线路轨距、超高、查照间隔、护背距离 的测量。可供工务维修、大修、工程测量及其他有关部门线路作业时使用。 该仪器测量速度快、使用方便，白天、夜间均可使用，是工务、工程部门...
	NE-1525 Featuring Automatic Reset Battery Hydraulic Pipe Plumbing Tool	卖方: Zhejiang Huaqi Information Technology Co., LTD	● The automatic reset battery hydraulic pipe crimping tool is an industry- solution designed for ...
	DC series high efficiency european jaw crusher	卖方: Shanghai Dongmeng Road and Bridge Machinery Co., Ltd.	Jaw crusher is widely used in ore crushing, construction aggregate production, construction waste...
	Internal Combustion rail drilling machine for rail construction	卖方: 834406	NZG-31型汽油机轨道钻孔机 该机器是铁路维护、施工和紧急维修作业中不可或缺的工具。采用空心钻头，具有快开功能的螺母夹紧机构，夹紧速度快，定位准确，钻孔快，操作简单，使用...
	Brown Fused Alumina For Abrasive	卖方: ZHENGZHOU HAOYUN NEW MATERIAL TECHNOLOGY CO., LTD.	Cooled and smelted under an electric arc at a high temperature above 2000 degrees, brown fused al...