CNC Carbide Compression Double Spiral Router Bits for MDF Laminate

CNC Carbide Compression Double Spiral Router Bits for MDF/Laminate
 
The part of the bit closest to the tip is upcut and the other end is downcut. That is why it’s called a compression router bit. It compresses the chips into the center of the bit.
 
Spiral router bits leave a clean edge on the top or bottom surface, depending on the direction of the cut. So we have up cut spiral router bits and down cut spiral router bits.
 
Compression spiral router bits are an excellent choice for woodworkers who must have a clean top and bottom surface, as they have a Up-Cut design on the tip of the bit and a Down-Cut design ground into the shank.
Designed to provide a smoother finished cut and router wood and wood composites where upward/ downward chip removal, long life and quality finish are desired. It’s great for cutting openings in wood.
 
This makes it especially great for plywood, laminates and MDF when you need both the top and bottom edges clean. You just have to make sure that the piece of wood you are cutting is thick enough so that both ends of the bit have room to work. Both the top and bottom are cut perfectly clean.
 
Choose from our large variety of solid carbide spiral compression router bits below. They are widely used on CNC and other automatic routers as well as hand-held router and table-mounted portable routers.


在线询价

至: SUZHOU RICO MACHINERY CO., LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Stone CNC Router Machine for Natural Stone Cutting Carving S1325C
Stone CNC Router Machine for Natural Stone Cutting Carving S1325C
Auto CNC Pressure Foot Spindle Clamps Roller Hold Down System for CNC Router
Auto CNC Pressure Foot Spindle Clamps Roller Hold Down System for CNC Router
 ISO30 SK30 HSK63F for Woodwork With Drive Dowel Insert Locating Pins for Toolchanger Aggregate
ISO30 SK30 HSK63F for Woodwork With Drive Dowel Insert Locating Pins for Toolchanger Aggregate
木工雕刻机刀库夹
木工雕刻机刀库夹
ISO25 Tool Cradle Clip ISO 25 Tool Holder Clamp for Auto Tool Changer CNC Machines
ISO25 Tool Cradle Clip ISO 25 Tool Holder Clamp for Auto Tool Changer CNC Machines
供应产品

Same products

ISO20 ER Collet Chuck CNC Toolholders for CNC Routers
ISO20 ER Collet Chuck CNC Toolholders for CNC Routers 卖方: SUZHOU RICO MACHINERY CO., LTD
HSK40E Tool Forks for CNC Router CNC Machine Tool Grippers Tool Holder Clips for HSK40E CNC Tool Holder
HSK40E Tool Forks for CNC Router CNC Machine Tool Grippers Tool Holder Clips for HSK40E CNC Tool Holder 卖方: SUZHOU RICO MACHINERY CO., LTD
BT50 Tool Gripper Clips CNC Tool Forks for Umbrella Type Automatic Tool Changer
BT50 Tool Gripper Clips CNC Tool Forks for Umbrella Type Automatic Tool Changer 卖方: SUZHOU RICO MACHINERY CO., LTD
ISO30 Tool Holder Forks HSD Tool Holder Clips for Woodworking Machine Plastic Tool Finger
ISO30 Tool Holder Forks HSD Tool Holder Clips for Woodworking Machine Plastic Tool Finger 卖方: SUZHOU RICO MACHINERY CO., LTD
HSK63F Tool Holder Clips ATC Tool Changer Grippers CNC Toolholder Forks Cradle
HSK63F Tool Holder Clips ATC Tool Changer Grippers CNC Toolholder Forks Cradle 卖方: SUZHOU RICO MACHINERY CO., LTD