CNC Wood Lathe Machine For Handrail and Wood Stair Spindles Making
EagleTec CNC Wood Lathe Machine for sale
From
This cnc wood lathe machine is an ideal machine for handrail or stair parts which are without engraved or turn-broaching patterns. Please look at it’s construction, with two axes and each axis with two cutters. Design of two cutters, one for roughing, the other for finishing, makes the efficiency double when compared with the one cutter lathe; two axes design enable the wood lathe to machining and finish two pillars in one time, which makes output double than one axis lathe. So take this cnc wood lathe machine compare with the one only with one axis one cutter, the output of the former is four times that of the latter; if compare with cnc wood lathe with two axes one cutter, the output of former is two times that of latter. Undoubtedly, it is a very high efficiency lathe machine. If you are looking for a machine to make regular balustrades and no need carving and turn-broaching function, this is a good choice for you; if not, please check EagleTec cnc wood turning machine EA-TL1530ST.
Application: cnc wood lathe machine is widely used to mill baluster, handrail, wooden stair spindles, pillars, furniture legs, baseball bats, banister, nunchakus and more.
Machining Capacity: wood milling only
Technical Parameter
Model | EagleTec EA-FL1516TT
Machine Type | Wood Lathe
Control Mode | Computer controlled (CNC)
Application | Wood milling
Number of Axis | Two
Cutter Number for Each Axis | Two
Broaching Spindle | Without
Turning Motor | 4.0KW Triple-phase asynchronous motor
Feeding Speed Range | 0 ~ 3000 rpm
Working Dia. Range | 20mm ~ 160mm
Working Length Range | 100mm ~ 1500mm
Power Supply Requirement | 380VAC/50Hz, 3Ph 4 Wires
Air Pressure Requirement | 0.6 ~ 0.8 Mpa
Lathe Weight | 1500KGS
Package Dimension | 3150x1220x1680mm (6.46CBM)
Package detail: the wood lathe machine is fully and tightly wrapped with plastic films first, then packed into plywood case. Suitable for long time sea shipment.
To learn more about this cnc wood lathe machine, please !
在线联系供应商
Other supplier products
Router Spindle Model GDZ-80-2.2B GDZ-100-3 GDZ-125-5.5 2.2kw 3.0kw 5.5kw for Sale | Router Spindle Motor for Sale From All cnc router parts replacement, one-stop shopping Router Spindle Motor GDZ-100-3 Specification Spindle ... | |
CNC Router DSP Controller Systems Weihong NK105G2 | Weihong NK105 is 3-axis CNC controller systems and it is one of the most popular CNC systems for CNC Routing machine. Another similar controller li... | |
ATC CNC Router Machining Center for Modern Furniture Making | Main Configuration of 1325 ATC Router 1) Linear style auto tool changer at end of table, six tools 2) Origin Italy HSD ATC spindle, 9.0KW 3) Ser... | |
Dust Collector Dust Extractor for Woodworking Machine | Dust collector for woodworking cnc router has another name of dust extractor. It is an optional device for woodworking cnc router equipment. Its fu... | |
High Frequency Spindle Air Cooled GDF46-18Z/3.5 GDF60-18Z/4.5 GDF60-18Z/6.0 | High Frequency Spindle Air Cooled GDF46-18Z/3.5 GDF60-18Z/4.5 GDF60-18Z/6.0 From High frequency spindle air cooled is widely used on basic cnc... |
Same products
PV System | 卖方: Sunrise Energy Co., Ltd | PV SYSTEMS On Grid PV system Self-generation, surplus power online, monthly income from elect... | |
Special Shape LCD TFT Display Module | 卖方: Shenzhen EXSON Technology CO.,LTD | Special shape LCD displays have become more and more popular in home appliances, Smart Metering e... | |
推台锯S350 | 卖方: 青岛联合晟达国际贸易有限公司 | 型号:S350主刀直径:350*30mm主刀转速:4000rpm划线刀直径:120*20mm划线刀速度:8000mm最大切削深度 45°:92mm最大切削深度 90° :120m... | |
推台锯 S315 | 卖方: 青岛联合晟达国际贸易有限公司 | 型号:S350主刀直径:350*30mm主刀片转速:4000rpm划线刀直径:120*20mm划线刀速度:8000mm最大切削深度 45°:92mm最大切削深度 90°:120m... | |
刨角机 MS-60 | 卖方: 青岛联合晟达国际贸易有限公司 | 电源功率:220/50HZzmm 电机转速(最大):31000r/min 加工高度(最大):60mm Comer刀具标准:双面铣刀1/4 1/6 电机功率:0.44kw 总尺寸:600... |