.

Traceable Rodders Copper cable in rod

TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location of the TRACEABLE DUCT RODDER .

We can generate the TRACEABLE DUCT RODDER has two kinds, one is to be able to carry the monitoring function, one kind is the individual tracking function. The difference between the two is that with a probe into the function of a video wire inside, and a power cable, you can head the head to install the head, in order to view the situation in the pipeline. A bare copper wire can be used to locate and track the position of the TRACEABLE DUCT RODDER in a single probe function.

The traceable duct rodders are available in 8mm-16mm diameter. Detectable duct rods are used to find, follow and accuratelymap the duct route without digging or trenching. The traceable duct rod is used in conjunction with both a signal transmitter and a receiver. The easily identifiable signal is transmitted along the entire length of the duct rod.

The traceable duct rod has an 18 AWG copper wire, almost twice the size of the competition, in the center of the fiberglass core. The copper wire is also connected to the end fittings so the transmitter leads canmake a direct connection to the copper wire. The female end fitting provides the attachment point for the transmitter's lead connection. The other transmitter lead is connected to a stake driven into the earth. The direct connection of the signal to the copper wire provides themost effectivemethod of signal transmission.

Roddiameter:φ6mm,φ8mm,φ9mm,φ10mm,φ11mm,φ12mm,φ13mm,φ14mm,φ15mm,φ16mm.Rod length:80m,100m,120m,150m,200m,250m,300m,350m,400m,500m.

Rod selectIon

Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including:

The size of ducting it is to be pushed through

The distance the rod is to be pushed

The number and tightness of bends in the ducting

If the ducting is already occupied by cable

When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals.

Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.

Rod

Tensile Strength

of Rod

Minimum Bend

Radius

Typical Max.

Duct Dia

Push or Pull

2,300 lb

105mm

50mm

100m

6

5800lb

180mm

60mm

150m

8

7,700 lb

260mm

80mm

200m

9

8,580 lb

300mm

100mm

250m

10

9850 lb

360mm

150mm

300m

11

11,000 lb

400mm

200mm

350m

12

13,000 lb

450mm

250mm

400m

13

17500 lb

510mm

300mm

450m

14

19500 lb

560mm

350mm

500m

15

23200 lb

610mm

400mm

550m

16

25120 lb

660mm

450mm

600m



在线联系供应商

至: Bazhou WanQi Power Tools Factory
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Traceable Rodders Copper cable in rod
Traceable Rodders Copper cable in rod TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location ...
Resin Cable Jointing Kits for Copper and Aluminium Cables
Resin Cable Jointing Kits for Copper and Aluminium Cables Scotchcast Resin Cable JointKit Product introduction: Cable Joint as an important connection point of the whole power supply network, its running s...
5mm,6mm,8mm,9mm,10mm Duct Rodder Multiple diameter
5mm,6mm,8mm,9mm,10mm Duct Rodder Multiple diameter Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
Traceable Rodders Copper cable in rod
Traceable Rodders Copper cable in rod TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location ...
5mm,6mm,8mm,9mm,10mm Duct Rodder Multiple diameter
5mm,6mm,8mm,9mm,10mm Duct Rodder Multiple diameter Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
供应产品

Same products

Electric Chainsaw
Electric Chainsaw 卖方: Zhejiang GuYueHu Industry&Trade Co.,Ltd. Suca battery electric chainsawis not only powerful but also good for the environment. The electri...
Matrix Body PDC Bit For Oil Well Drilling Hard Rock
Matrix Body PDC Bit For Oil Well Drilling Hard Rock 卖方: Cangzhou Great Drill Bits Co.,Ltd. Overview of Matrix Body PDC Bit GM1605T Matrix body PDC bit GM 1605T is made by Tungsten carbide...
Matrix Body PDC Bit
Matrix Body PDC Bit 卖方: Cangzhou Great Drill Bits Co.,Ltd. GREAT, as one of the professional drill bit manufacturers in China, we design and manufacture a w...
Longer Working Life Hybrid Drill Bits Improve Drilling Effeciency
Longer Working Life Hybrid Drill Bits Improve Drilling Effeciency 卖方: Cangzhou Great Drill Bits Co.,Ltd. Overview of Hybrid Drill Bit Hybrid drill bits are compounded by the PDC fixed cutting and the r...
Three Blade Wings Drag Rock Drill Bit For soft formations
Three Blade Wings Drag Rock Drill Bit For soft formations 卖方: Cangzhou Great Drill Bits Co.,Ltd. Overview of Drag Bit Drag bitare manufactured from forged high-quality alloy steel and hard allo...