10 SFP+ C/DWDM Transponder
10GTransponder
10G otn transponderservice card launched by Sintai Communication Co., Ltd. supports four types of service access with 42M~11.3G rates.
Its main function is to finish the 3R regeneration of any 5-channel signals under any protocol within the rate of 1.25 Gbit/s~11.3 Gbit/s to be accessed, and then convert them to optical signals of a standard DWDM wavelength or standard CWDM wavelength, so that the multiplexing unit can conduct WDM for optical signals of different wavelengths and also achieve the inverse process of the above process.
It's applicable to the wavelength division transmission solution for any access of services with the rate of 11.3G or below.
10 SFP+ CWDM TransponderSpecification
|
Function |
Note |
|
|
Card type |
10G OTU-3R |
10G OTU-2R |
|
interface |
Client-side interface: 5 SFP+ hot-pluggable, compatible with SFP |
|
|
WDM-side interface: 5 SFP+ hot-pluggable, compatible with SFP |
||
|
Line mode |
Supports transparent transmission of any type of service in four 42M~11.3G rate ranges, and converts four service optical signals into four WDM standard wavelength optical signals. |
|
|
Relay mode |
Support 42M~11.3G wavelength electrical relay. |
|
|
Support service type |
GE, 10GE |
FE, GE, 10GE |
|
1/2/4/8/10G FC |
1/2/4/8/10G FC |
|
|
STM-16/64 |
STM-1/4/16/64, OTU1/OTU2/OTU2e |
|
|
CPRI-2/3/6/7 |
CPRI-1~8, 42M~11.3G Any |
|
|
WDM technology |
Support CWDM: 18 waves |
|
|
Support DWDM: C band 50GHz 96 waves |
||
|
Occupied slot number |
Support OTNS8600 series chassis, occupy 1 slot |
|
|
Network management function |
Support real-time monitoring of the port working state, including transmitting optical power and receiving optical power, temperature, etc. |
|
|
Power consumption |
16W (max, including transceiver) |
|
|
MTBF |
＞100000 hours |
|
As a wdm optical transceivers supplier, we have types of optical transponderfor sale, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
40G QSFP+ Multimode Transceiver | Designed for 40G Ethernet and OTU3 links over multimode fibers, the Sintai 40G QSFP+ multimode optical transceivers use 850nm wavelength and suppor... |
 |
100G CFP2 Multimode Transceiver | Designed for 100G Ethernet links over multiple multimode fibers, the Sintai 100g cfp2supportstransmission distance up to 400m using 850nm wavelengt... |
 |
Optical Splitter | 01- FBT Coupler Splitter FBT wdm splitteris an optical splitter that uses the Fused Biconical Taper (FBT) technique for splitting optical power an... |
 |
40G QSFP+ Transceiver | 01- 40G QSFP+ Single Mode Transceiver Designed for 40G Ethernet and OTU3 links over single mode fibers, the Sintai 40G QSFP+ single mode optical tr... |
 |
Optical Transceiver | Sintai full range of china opticalmodules include SFP(1.25G/2.5G), SFP+(10G), SFP28(25G), QSFP+(40G), QSFP28(100G), CFP(100G), CFP2(100G/200G/400G)... |
Same products
 |
SC/UPC SM Connector | 卖方: Shenzhen Puhuixin Tecnhnology Co., Ltd. | SM/SCFiber Connector Definition PHX design, develop molds and produce various of kinds of Single... |
 |
Sc Fiber Optic Adapter | 卖方: Shenzhen Puhuixin Tecnhnology Co., Ltd. | SCFiber Adapter A fiber optic adapter also called a coupler, is a small device designed to termi... |
 |
SC Auto Shutter Connector And Adapter | 卖方: Shenzhen Puhuixin Tecnhnology Co., Ltd. | SC Auto Shutter Connector And Adapter SCapc fast connectorfeatures low insertion loss and added ... |
 |
SC Attenuator | 卖方: Shenzhen Puhuixin Tecnhnology Co., Ltd. | SC Attenuator Applied to SC-APC optical fiber interface, SC interface and RJ-45 interface look s... |
 |
Remote Optical Fiber Cable | 卖方: Shenzhen Puhuixin Tecnhnology Co., Ltd. | Remote Optical Fiber Cable Remote outdoor multimode fiber optic cableis made by placing a layer ... |
