16CH CWDM Mux Demux
CWDM technology provides the flexibility to increase capacity of existing fiber infrastructure by enabling multiple channels/wavelengths over the same fiber cabling. Each channel carries data independently from each other, allowing network designers to transport different data rates.
It's protocol and rate transparent supporting such applications as 1G/10G Ethernet, SDH/SONET, and 8/4/2/1G Fiber Channel across the same fiber link.
16 Channel CWDMModulefeatures
Multiplexing of up to 16 channels on fiber pair
Low insertion loss
1U 19'' low profile modular design
1% monitor port for Tx and Rx, ensures easy troubleshooting without downtime
Duplex LC/UPC, easily support duplex patch cables between the transceiver and passive unit
Compliant to ITU-T G.694.2 standard and Telcordia GR1209, GR1221
Standard 16-channel CWDM band 1270 nm-1570 nm, 20 nm spacing
Based on thin-film filter technology
Passive, no electric power required. (MTBF ca. 500 years)
16CH CWDM Mux DemuxApplications
Maximizes fiber in local loop applications
Overlays CWDM with existing1310 nm transmission systems
Provides bidirectional transmission on a single fiber
Supports linear (bus) add/drop architectures
Supports hub-and-spoke ring architectures
16CH CWDM Mux Demux Compliance
ITU-T G.694.2 and G.695
GR-1221 Issue 3 and 1209
RoHS compliant 6/6
16CH CWDM Mux Demux specification
Item |
CWDM MUX/DEMUX |
|||||
Channel number |
1 |
2 |
4 |
8 |
16 |
18 |
Operating wavelength (nm) |
1260~1620 |
|||||
Center wavelength (nm) |
ITU-T Grid |
|||||
Channel spacing (nm) |
20 |
|||||
Channel insertion loss (dB) |
≤0.8 |
≤1.8 |
≤2.6 |
≤4.5 |
≤5.0 |
|
Channel bandwidth (dB) |
ITU±6.5 |
|||||
Flatness (dB) |
≤0.5 |
|||||
Adjacent channel isolation (dB) |
≥30 |
|||||
Non-adjacent channel isolation (dB) |
≥40 |
|||||
Return loss (dB) |
≥50 |
|||||
Directivity (dB) |
≥55 |
|||||
Polarization-dependent loss (dB) |
≤0.2 |
|||||
Polarization mode dispersion (ps) |
≤0.2 |
|||||
Power Handling (dB) |
≤500 |
|||||
Operating Temperature (°C) |
0~+70 |
|||||
Storage Temperature (°C) |
-40 ~+85 |
|||||
Package type |
Steel tube, ABS box, LGX standard box, 1U standard 19 inch rack |
As a 16 channels cwdm mux demux supplier, we will do our best to meet all the needs of customers.
We also have types of china optical amplifierfor sale, anything you need, please contact us.
在线联系供应商
Other supplier products
1U EDFA Equipment | 1U EDFAEquipment The main function of the EDFA optical amplification subsystem launched by Guangzhou Sintai Co., Ltd is to compensate the signal... | |
Optical Communication Products | Based on the existing service requirements and in face of the future network development, SINTAIfirst developed the optical transmission network sy... | |
100G CFP DWDM Transceiver | The 100G CFP-DCO coherent optical transceiver launched by Guangzhou Sintai Communication Co., Ltd. adopts a standard CFP package and advanced modul... | |
Integrated WDM System | The integrated WDM System offers 1U 48X10G→480G System and 1U 12X100G→1.2T System which supports single-channel access rate up to 10 Gbit... | |
4CH CWDM Mux Demux | CWDM Coarse Wave Division Multiplexing (CWDM) Multiplexer/Demultiplexer (MUX/DEMUX) modules support ITU-T G.694.2 wavelengths between 1270nm to 161... |
Same products
GJS-D021 Dome Fiber Optic Splice Closure | 卖方: \\\\ | Functions Type D021 dome closure fiber opticcan be used for aerial,underground, pipeline and wal... | |
GJS-D010 Dome Fiber Optic Splice Closure | 卖方: \\\\ | GJS-D010 Dome Fiber Closure Functions Type D010 fiber optic splice enclosurecan be used for a... | |
Indoor FTTH Drop Cable | 卖方: \\\\ | Functions With the development of fiber optic communication, FTTH has been the final solution of... | |
F2H-OTB-A Series Indoor Optical Termination Box | 卖方: \\\\ | Functions F2H-OTB-A Series indoor fiber termination boxis used as terminal equipment of otb fibe... | |
F2H-FOSC-ODP Fiber Optic Splice & Splitter Closure | 卖方: \\\\ | Functions F2H-FOSC-ODP Fiber Optic Splice & Splitter Closure applies vented structure and me... |