1U EDFA Equipment
1U EDFAEquipment
The main function of the EDFA optical amplification subsystem launched by Guangzhou Sintai Co., Ltd is to compensate the signal's china opticalpower in the transmission link, which can finally extend the optical signal transmission distance.
It can be divided into BA, LA, and PA based on the application scene. BA is usually used at the transmitting end to boost the output optical power of the system. LA is usually used at the repeater section to compensate for the power loss of the line. PA is usually used at the receiving end of the system to improve the input optical power.
The EDFA can amplify all the input optical signals by using the erbium-doped fiber as the gain medium and using the 980nm or 1480nm pump laser as the pump source with one-stage or two-stage amplification. It's one of the most indispensable and important parts of the DWDM system, high-speed transmission system, and all-optical network in the future.
1U EDFA Equipment Feature
Support the unified amplification of the 48CH/96CH DWDM signal of the C band.
Automatic gain control(AGC).
Flat gain and low noise figure.
Support built-in VOA and automatic adjustment of optical power.
Support two-stage amplification with OADM or DCF modules to be configured in the line.
1U pluggable rack, flexible capacity configuration.
Support AC power 220V, DC power -48V, and 1+1 power input protection.
Free of configuration installation and support plug and play.
Support multi-kinds of graphical interface network management, such as SNMP, Web.
1U EDFA Equipment Specification
|
Item |
Parameter |
Remark |
||
|
Working wavelength range |
Stand type: 1529nm~1561nm, extended type: 1528nm~1568nm |
|||
|
EDFA type |
BA |
LA |
PA |
|
|
Min input power (typical) |
-22dBm |
-30dBm |
-32dBm |
|
|
Saturation output power (typical) |
+20dBm |
+20dBm |
+16dBm |
To be customized with max +23dBm |
|
Rated gain (typical) |
17dB |
25dB |
20dB |
To be customized |
|
Gain flatness |
≤1.5dB |
|||
|
Noise figure |
≤5.5 dB |
|||
|
Working temperature range |
-10℃~60℃ |
|||
|
Working humidity range |
5%~95% no condensation |
|||
|
Storage temperature |
-40℃~85℃ |
|||
|
Equipment dimension |
1U: 44 mm (H)×442 mm (W)×280 mm (D) |
|||
|
Network management |
Support multi-kinds of graphical interface network management, such as SNMP and Web |
Optional |
||
|
Special technology |
Built-in VOA with automatic adjustment of optical power |
Optional |
||
|
Optical interface |
LC/UPC |
|||
|
Power supply |
AC: 90 ~ 260V or DC: -36 ~ -72 V (1+1 power input backup) |
|||
|
Typical power consumption |
Full configuration<60W |
|||
|
Heat dissipation |
Fan cooling |
|||
|
MTBF |
＞100000 hours |
|||
在线联系供应商
Other supplier products
|
|
1U EDFA Equipment | 1U EDFAEquipment The main function of the EDFA optical amplification subsystem launched by Guangzhou Sintai Co., Ltd is to compensate the signal... |
 |
4CH CWDM Mux Demux | CWDM Coarse Wave Division Multiplexing (CWDM) Multiplexer/Demultiplexer (MUX/DEMUX) modules support ITU-T G.694.2 wavelengths between 1270nm to 161... |
 |
FBT Coupler Splitter | FBT splitter is an optical splitter that uses the Fused Biconical Taper (FBT) technique for splitting optical power and/or splitting wavelengths. ... |
 |
AWG Mux Demux | AWG Mux Demux 01- Athermal AWG Module The athermal Array Waveguide Grating Module (awg mux) from Sintai is based on waveguide grating technolog... |
 |
1U Platform | The integrated DWDM/CWDM platform of OTNS8600 Ⅰ type optical transmission network system is mainly used in the metro area access layer network, and... |
Same products
 |
GJS-D021 Dome Fiber Optic Splice Closure | 卖方: \\\\ | Functions Type D021 dome closure fiber opticcan be used for aerial,underground, pipeline and wal... |
 |
GJS-D010 Dome Fiber Optic Splice Closure | 卖方: \\\\ | GJS-D010 Dome Fiber Closure Functions Type D010 fiber optic splice enclosurecan be used for a... |
 |
Indoor FTTH Drop Cable | 卖方: \\\\ | Functions With the development of fiber optic communication, FTTH has been the final solution of... |
 |
F2H-OTB-A Series Indoor Optical Termination Box | 卖方: \\\\ | Functions F2H-OTB-A Series indoor fiber termination boxis used as terminal equipment of otb fibe... |
 |
F2H-FOSC-ODP Fiber Optic Splice & Splitter Closure | 卖方: \\\\ | Functions F2H-FOSC-ODP Fiber Optic Splice & Splitter Closure applies vented structure and me... |
