.

2V GEL Solar Wind Battery System

NPG2000-2 (12V2000Ah/10hr)NPG Series is GEL battery which is manufactured with AGM separator and colloidalSilicon. Gel battery are featured with low self-discharge、strong ability to recover from deepDischarging、excellent cycle life and performance at cold ambient temperatures than conventional VRLABattery ConstructionComponentPositive plateNegative plateContainerCoverSafety ValveTerminalSeparatorElectrolyteRaw materialLead DioxideLeadABSABSRubberCopperFiberglassColloidal siliconGeneral Feature●Absorbent Glass Mat(AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding.●Not restricted for air transport-complies with IATA/ICAO Special Provision A67.●UL-recognized component.●Can be mounted in any orientation. Computer designed lead, calcium tin alloy grid for high power density.●Long service life, float or cyclic applications.●Maintenance-free operation.●Low self discharge.SPECIFICATIONNominal voltageVNumber of cell 1Length(mm/inch 490/19.3Width(mm/inch) 350/13.8Height(mm/inch 345/13.6Total Height(mm/inch) 367/14.45Approx. Weight(kg/lbs) 125/275.5Performance CharacteristicsCapacity77°F(25℃)100 hour rate (14A, 1.85V )2400Ah20 hour rate (105A, 1.8V)2100Ah10 hour rate (200A, 1.8V)2000Ah1 hour rate (1180A, 1.6V)1180AhInternal ResistanceFull charged Battery 77°F(25℃): 0.3mΩOperating Temperature RangeDischarge:-20~60℃102%Charge:-10~60℃100%Storage:-20~60℃85%Self-Discharge3% of capacity declined per month at 20℃ (average)Max. discharge current77℉(25℃): 3000A(5S)Charge(ConstantVoltage)Float: 2.23~2.28V / 77℉(25℃)Cycle: 2.38~2.42V / 77℉(25℃)Max. Current:400ADischarge Constant Current (Amperes at 77℉ 25℃)End Point Vlots/Cell5min10min15min30min1h3h5h10h20h1.60V.65V.70V.75V.80VDischarge Constant Power (Watts at 77℉ 25℃)End Point Vlots/Cell5min10min15min30min45min1h2h3h5h1.60V.65V.70V.75V.80VNote)The above characteristics data are average values obtained within three charge/discharge cycles not the minimum values. 


在线联系供应商

至: SHENZHEN LEADHOO BATTERY CO.,LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

LEADHOO is one of the professional 4v/4.5ah electric scale sealed maintenance-free rechargeable vrla lead-acid battery series manufacturers and sup...
NP38-12 (12V38Ah/10hr)The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and ...
NP1.2-6 (6V1.2Ah/20hr)  The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators an...
NPG Series is GEL battery which is manufactured with AGM separator and colloidal Silicon. Gel battery are featured with low self-discharge strong a...
GF150-12 (12V150Ah/10hr) The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators a...
供应产品

Same products

China manufacturer Pressure Gauge HS75668 for power generation
China manufacturer Pressure Gauge HS75668 for power generation 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China manufacturer Pressure Gauge HS75668 for power generation It is YOYIK special sale. Deyang ...
China factory Vacuum Switch HS70595 for power station
"China factory Vacuum Switch HS70595 for power station 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China factory Vacuum Switch HS70595 for power station Our company mainly serves thermal power pl...
China made TSI Preamplifier CON021/916-240 for power plant
China made TSI Preamplifier CON021/916-240 for power plant 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD China made TSI Preamplifier CON021/916-240 for power plant Dongfang Yoyik has advanced technology...
China manufacturer Preamplifier  for power generation
China manufacturer Preamplifier for power generation 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China manufacturer Preamplifier for power generationIs to use the generator sets of professiona...
Piezo Clamps/Piezo Forceps gripping displacement to 80um for wire bonding machine
Piezo Clamps/Piezo Forceps gripping displacement to 80um for wire bonding machine 卖方: 哈尔滨芯明天科技有限公司 According to the requirements of automatic wire bonding machine, CoreMorrow produces piezo clamp,...