DWDM SFP be used with single fiber DWDM system and dual fiber DWDM system
1、Product Introduction：DWDM SFP be used with single fiber DWDM system and dual fiber DWDM systemDense Wavelength Division Multiplexing (DWDM) Small Form-Factor Pluggable (SFP) transceivers provide the high speeds and physical compactness that today's networks require while delivering the deployment flexibility and inventory control that network administrators demand. Our DWDM SFPs are available in all 100 GHz or 50Ghz C-band wavelengths on the DWDM ITU grid. They are designed to Multi-Source Agreement (MSA) standards to ensure broad network equipment compatibility. As multirate interfaces they support any protocol from 100 Mbps to 4.25 Gbps,Website:, for 8G/10G please see SFP+ category. The EOLS-16xx-xx transceivers are small form factor pluggable modules for bi-directional serial optical data communications such as 4x/2x/1x Fibre Channel, SDH/SONET, Ethernet applications.The modules are hot pluggable and digital diagnostic functions area vailable via an I2C serial bus specified in the SFP MSA SFF-8472. The modules meet the requirements of the IEEE802.3 Gigabit Ethernet standard and ANSI Fibre Channel specifications, and are suitable for interconnections in Gigabit Ethernet and Fibre Channel environments. Can be used with single fiber DWDM system and dual fiber DWDM system. 2、Product Parameter：DWDM SFP be used with single fiber DWDM system and dual fiber DWDM system 3.Product Feature：DWDM SFP be used with single fiber DWDM system and dual fiber DWDM system· Operating Data Rate 100Mb ~ 4.25 Gbps· Available in all C-Band Wavelengths on the 50GHz or 100Ghz DWDM ITU Grid· Single 3.3V Power Supply and TTL Logic Interface· Hot-Pluggable SFP Footprint Duplex LC Connector Interface· Compliant with Class 1 FDA and IEC60825-1· Laser Safety· Compliant with SFP MSA· Compliant with SFF-8472· Operating Case Temperature: Standard: 0 to 70°C / Extended: -5 to 70°C 4、 Shipping and Servicing ：DWDM SFP be used with single fiber DWDM system and dual fiber DWDM system1) Paying：2 Shipping：3) Servicing: 5、 Recommendations ：DWDM SFP be used with single fiber DWDM system and dual fiber DWDM system1) SGMII SFP is a standard serial ID compatible with SFP MSA base - 100 fx application design2) 100BASE-SX is a version of Fast Ethernet over optical fiber 3) SFP 4G SFP 4 g is to use optical fiber communication and laser receiving the hotplug function of power supply.4) CWDM SFP 5) Compact SFP CSFP 6) BIDI SFP SDHSONET
Other supplier products
|
|
|
Description2x2 Mechanichal Optical Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is... |
|
|
|
4 port Polarization Insensitive Optical CirculatorFeatures• Low Insertion Loss• Wide Band High Isolation• Low PDL• Compact In-Line Package• High St... |
|
|
|
EDFA single channel gain block optical amplifier is designed for use in single channel optical transmission system. By application,Website:, this p... |
|
|
|
DescriptionMicro-Optics WDM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provi... |
|
|
|
EDFA-PA optical amplifier is a low noise amplifier that is specially designed for single channel optical transmission system.It is installed before... |
供应产品
Same products
