sell 13.56MHZ mini rfid module,RC522,RC523,50ohm antenna
JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. The impedance between RF module and antenna was tuned by impedance analyzer; so the module has excellent read/write performance and stability. Though the wire can reach 10m, but the performance is good. Normally the wire should be 60cm that is the module's best performance and stability. JMY620 adopts surface mount installation form. Small size is a major feature of JMY620. JMY620 has many kinds of funtions and it can support various contactless IC card under international standards. Meanwhile it can support the cards from different suppliers. Designer classified&integrated the operation commands for contactless IC cards. In this situation, the uesr can operate it easily via sending simple commands. The most important features for JMY620 is that it can support contactless IC cards(T=CL) fully. It can send and receive more than 256 Bytes APDU commands and also support FSDI=8. Qualifications:
• PCD: NXP MF RC522, NXP MF RC523
• Working frequency: 13.56MHz
• RF standard: ISO14443A, ISO14443B
• Operating distance: 100mm(depending on card and antenna design)
• Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
• Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
• Auto detecting card: Supported, default OFF; Can be set
• Interface: IIC, UART(selected by SPS pin, recommend to use IIC)
• Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps
• Max.command length: 511 Bytes
• Interface level: 3.3V (TTL level; 5V tolerance)
• Power supply: DC 3.3V + 5V(±0.5V)
• Power consumption: Working mode:80mA; Idle:100uA
• Dimension: 22mm×35mm
• Package: Surface Mount
• Weight: about 10g
• Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
• Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
• ISP: Supported
• RoHS: Compliant
Antenna connects to the module by 50ohm coaxial line.
TX600, size: 70mm*70mm, 90mm reading range
TX601, size: 50mm*50mm, 70mm reading range
TX602, size: 30mm*30mm, 60mm reading range
Any requirements is available.
Other supplier products
|
sell 13.56MHZ rfid reader.RS232C,LED display |
MR600 series contactless smart reader is the desktop reader bases on NXP PCD or compatible PCD. The reader inlays LED Nixie tube which with 8 bit... |
|
13.56MHz HF RFID module JMY504 with IIC&UART interface,RC522,RC523 |
JMY504 series are RFID reader/writer module with UART and IIC serial ports. JMY504 has various functions and supports multi ISO/IEC standard of con... |
|
sell 13.56MHZ rfid module,ISO15693,USB(HID) |
JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to r... |
|
出售13.56MHz 高频读写卡器模块JMY501 |
JMY505是一个由用户通过IIC或UART接口发送命令,从而完成对非接触IC卡的读写等操作的一个模块式电路。支持多种非接触IC卡的操作,支持多家不同供应商的卡片。设计者对非接触IC卡的命令进行了分类封装整合,因此用户通过IIC或UART对模块发出的命令相对简单,但是却能完成对各种非接触IC卡... |
|
sell hf rfid reader,USB or RS232C |
MR701 series, based on NXP PCD or compatible PCD, is popular and high performance desktop reader. The reader supports series IC cards according t... |
供应产品
Same products