Enactus-eCartex ANSI Single Seals Burgmann ECartex ANSI Single Seals Replacement

FeaturesSingle sealAvailable for standard (eCartex-ASPN) and big bore (eCartex-ABPN) seal chambersCartridgeBalancedIndependent of direction of rotationSingle seals with flush (-ASPN,Website:, -ABPN) and with quench combined with lip seal (-ASQN, -ABQN) or throttle ring (-ASTN, -ABTN)AdvantagesThe series has sliding surfaces that are equipped with EagleBurgmann DiamondFace technology as standardUp to 80 % less energy consumption and minimized heat generation of seal due to friction-reducing DiamondFace layerUp to 100 % extended operating period, prolongation of MTBF and MTBR intervalsSignificantly improved dry-run capability for inadequately lubricated sealing surfaces, thus vastly improved process safetyUniversally applicable, even with high solids content in the mediumOperating rangeShaft diameter: d1 = 1.000" ... 3.750"Other sizes on requestTemperature:t= -40 °C ... 220 °C (-40 °F ... 428 °F)(Check O-Ring resistance)Sliding face material combination BQ1Pressure: p1 = 25 bar (363 PSI)Sliding velocity: vg = 16 m/s (52 ft/s)Sliding face material combination Q1Q1 or U2Q1Pressure: p1 = 12 bar (174 PSI)Sliding velocity: vg = 10 m/s (33 ft/s)Axial movement:±1.0 mm, d1≥75 mm ±1.5 mmMaterialsSeal face: Silicon carbide DiamondFace (Q15)Seat: Silicon carbide DiamondFace (Q15)Secondary seals: FKM (V), EPDM (E), FFKM (K), Perfluorcarbon rubber/PTFE (U1)Springs: Hastelloy® C-4 (M)Metal parts: CrNiMo steel (G), CrNiMo cast steel (G)Recommended applicationsProcess industryPetrochemical industryChemical industryPharmaceutical industryPower plant technologyPulp and paper industryWater and waste water technologyMining industryFood and beverage industryUniversally applicableANSI process pumpsServiceProvide special designAccording to the requirements and conditions for the custom processing
Other supplier products
|
|
|
Structure Description:Similar to Burgmann 560A,Website:, John crane Type 21Operating Limits:Temperature:-20℃ to +120℃Pressure:≤1.0MPaSpeed:≤15m/sMa... |
|
|
|
Structure Description:Equivalent to Burgmann M7N mechanical sealWave spring design,Website: spring design is also availablePump screw desgin could ... |
|
|
|
Structure Description:Reaplcement of Burgmann and John crane pump sealOperating Limits:Temperature:-20℃ to +120℃Pressure: ≤0.5MPaSpeed: ≤10m/sStand... |
|
|
|
FeaturesFor top entry drives,Website:, type M481 to DIN Single or double seals Unbalanced Independent of direction of rotation Multiple springs rot... |
|
|
|
Features:Equivalent to Burgmann BT-PN,Website: Crane Type 106Single and dual sealsShort axial installation lengthMaterial approvals availableOperat... |
供应产品
Same products