T Bar Angle Roll Forming Machine
Working flow: Decoiler--feeding--punching--roll forming--cut to length--output table Equipment list for T bar angle roll forming machine: Main specification of T bar angle roll forming machine: A. 3ton manual decoiler B. Main roll forming system of T bar angle roll forming machine
1) Drive: Chain
2) Main shaft dia: ¢56mm material: 45﹟forge steel
3) Roller material: Gcr15 bearing steel and quench treatment hardness 55-58,Website:, chrome coated 0.05mm
4) Roll station: 13 groups
5) Raw material: 0.5-0.6mm
6) Valid width after fromed: according to drawing
7) Working speed: 10m--15m/min(Exclude cutting time)
8) Length Tolerance: ±2mm
9) Weight of machine: about 3ton
10) Size of machine: About 5500×800×1500mm L x W x H
11) Color of machine: depend on customer
12) Coder: Omron
13) Control: PLC Panasonic, made in Japan. 380V 50HZ
14) Computer operating panel: touching screen
15) Cutting: Hydraulic cutting
16) Auto cutting when reach the set length.
17) Hydraulic power: 3KW
18) Blade material: Cr12,quenched 55°-58°
19) Working pressure:16mpa
20) Cutting tolerance: +/- 1.5mmCharacter of main structure:
a) The structure of the T bar angle roll forming machine is simple and the appearance of the T bar angle roll forming machine is beautiful because we adopt the shape-steel structure and most of the connecter is screw which makes the machine flexible and stronger.
b) All the components of T bar angle roll forming machine are from brand-famous enterprise so that they ensure the machine normal function very effectively.
c) We adopt the automatic length-fixed forming and cutting to guarantee the length to be precise and the finished product clear without deforming .
d) T bar angle roll forming machine is very easy to install the equipment and suitable for producing in the factory.
Low noise with high efficiency.Photos for T bar angle roll forming machine Certificates Certificates After sales service:
Other supplier products
|
|
Main specification of 15 ton hydraulic decoiler:
1) Capacity: 15 tons
2) Expanding Range: Φ460~Φ610mm,Website:, namely 18-24 inch.
3)... |
|
|
The profile drawing of shelf making machineThe thickness of Material: 1.5-2.5mm Working flow: uncoiler—Leveling—Punching--roll forming--- hydraulic... |
|
|
The profile drawing for reference The thickness of Material: 0.3-0.8mm Working flow: Decoiler—Feeding—Roll forming----Hydraulic stepping--hydra... |
|
|
Working flow: Decoiler--feeding--punching--roll forming--cut to length--output tableEquipment list for CU stud roll forming machine:
NO.Prod... |
|
|
Brief Introduction of the Line Φ60High-Frequency Welded Pipe Production Line is able to produce welded pipes ofΦ17~Φ60mm in diameter and 0.7~3.0mm ... |
供应产品
Same products