Channel Cable Tray Roll Forming Machine
Equipment structure of the Channel Cable Tray Roll Forming Machine: Equipment structure of the Channel Cable Tray Roll Forming Machine decoiler---Leveler---Servo-feeder---Punching----outTable---Roll forming---cutting---CollectionFeeding machine Width of material sheet: 100—600mm; Thickness of material sheet: 1.6mm~2.0 mm Inner diameter: 508mm Range of expanding: ф480-520 mm Maximum outer diameter: φ1300mm, loading: ≤6T Working type: Hydraulic expansion, passive decoilerLeveler Working roller: nine rollers type leveling machine Feature of structure: after the quenching and tempering, chrome-plating processing, the rigidity, surface roughness of the roller etc. are all enhance greatly; It is composed by the clamping roller and the leveling roller, the clamping roller can control independently, the roller of leveler use the entire structure with two adjustment point in the head and end in order to develop the quality of leveling. The leveler has one pair of horizontal guide roller and two pairs of vertical guider roller, the vertical guider roller can move to the middle side or move in the same time. The hand wheel with scale is convenient to position the midline.NCF800 Servo feeder Function: material feeding Feature: Uses the servo motor-driven .Multistage type feeding: May input 10 group of different feeding lengths, The liquid crystal touching screen demonstrated is advantageous for the change, establishes various technical parameters. The auto-induction start system and the punch press linkage (control punch press start).Punching press Type of punching press: JF21-200 Punching press: Uses the steel plate welding fuselage, the rigidity is strong with good appearance .Uses the combined type air operated friction clutch. Conveying table Type: roller type with power (convey the sheet) b. Function and structure: Guide the punching cutting sheet into roll forming machine successfully. The guiding device consists of clutches. The guide wheel adjust different width of the sheet. C.Technical parameters: width of the material 100---600mmTechnical parameter:
1. Forming station: about22stations (according to equipment requirements)
2.Width of feeding: 100～600mm
3. Axis of rollers: (according to equipment requirements)
4. Distance of two sides rollers: about 350-550mm
5. Power of motor: 22kw (5.5kwX4)
6. Production speed: 2-4m/min, the whole speed line is 10m/min in theory.
7. The roller forming machine consists of C profile and reinforcing rib.Collection table Structure: roller type with no powerElectric control system
a.Full line is controlled by PLC control system with touch screen operation to achieve the human and PLC interactive. The operator can monitor the setting program (programmable control) and modify the parameter to control the line. Also can check the running status, parameter and error indication etc...
b.Operation type: manual /auto two type switch. In manual position: can run the each part of the machine. In auto position: can run the full line. The emergency stop ensures the safe of the equipment and operator.
c. Machine side is equipped with the manual operation control panel for convenient worker to operate;payment method for Channel Cable Tray Roll Forming Machine Payment: pay 30% in advance before production, the buyer will check and accept the machine in the seller's factory. The seller has the obligation to operate. The buyer should pay 70% balance before shipment. Term of delivery: 55days after receive 30% deposit in advance and sales confirmation be confirmed by both parties.Company Testimonial Exhibition After sales service:
1).Engineer will give free training lessons to labors in buyer’s factory.
2).The Buyer will buy the round-trip air ticket for Engineer if visa application is approved.
3).The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer per day.
4).During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
5).We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.
Other supplier products
|
|
|
The profile drawing of Z Purlin Roll Forming Machine Working flow: Uncoiler—Feeding—Leveling--roll forming---Punching ---hydraulic cut to length—... |
|
|
|
Main specification of the Thin Sheet Cut To Length Machine: Cut to length for Thin Sheet Cut To Length Machine 5 tons hydraulic decoiler
● Si... |
|
|
|
The profile drawing for shelf rack machineThe thickness of Material: 1.5-2.5mm Working flow of shelf rack machine: uncoiler—Leveling—Punching--rol... |
|
|
|
Working flow: Decoiler--feeding--punching--roll forming--cut to length--output table Equipment list: NO.ProductQuant.1Manual decoiler12Mai... |
|
|
|
The profile drawing for U Purlin Roll Forming Machine The thickness of Material: 2.0-3.0mm Working flow: Uncoiler—Feeding—Leveling—Punching--ro... |
供应产品
Same products
