Barrier Roll Forming Machine For Highway Roll Forming Equipment
The profile drawing for Barrier Roll Forming Machine for Highway The thickness of Material: 3.0-4.0mm Working flow: Hydraulic uncoiler—Feeding—Leveling-- hydraulic punching—Roll forming—Hydraulic cutting—output table Character of main structure
a) The structure of the Barrier Roll Forming Machine is very strong and the appearance of the machine is beautiful because we adopt the H beam base with cast iron station for roll forming system
b) All the components of Barrier Roll Forming Machine for Highway are from brand-famous enterprise so that they ensure the machine normal function very effectively.
c) We adopt the automatic length-fixed forming and cutting to guarantee the length to be precise and the finished product clear without deforming .
d) The Barrier Roll Forming Machine for Highway is very easy to install the equipment and suitable for producing in the factory.
e) Low noise with high efficiencyMain Specification of the Barrier Roll Forming Machine for Highway A. 5T hydraulic decoiler
1) Capacity: 5ton
2) Loading width: MAX 800mm
3) Valid expanding range for coil inner diameter: 480~520mm
4) Motor power: 5.5KW
5) Hydraulic power: 4KW B. Main roll forming system for Barrier Roll Forming Machine for Highway
1) Main motor power: 37kw
2) Separate motor reducer: 750 type
3) Punching: Hydraulic pre-punching before forming,
4) Punching mould:Cr12mov,quenched 58°~62°
5) Hydraulic power: 7.5KW
6) Roller material:Gcr15 bearing steel and quench treatment hardness 58°~62°, chrome coated 0.05mm
7) Leveling rollers: 7rollers(three upper and four lower)
8) Roll forming station: 16groups
9) Diameter of main shaft: 100mm
10) Drive: Gearbox with cardan shaft
11) Raw material: Black steel or galvanized steel
12) Thickness of Raw material: 3.0-4.0mm
13) Working speed: 8m--15m/min(Exclude cutting time)
14) Length Tolerance: ±2mm
15) Cutting: Hydraulic cutting after forming, Auto cutting when reach the set length.
16) Cutting blade: Cr12mov
17) Cutting tolerance: +/- 1.5mm
18) Hydraulic power: 7.5KW
19) Hydraulic pressure: 30Mpa
20) Weight of machine: about 20ton
21) Size of machine: About 13000×2000×1500mm L x W x H
22) Color of machine: depend on customer
23) Coder: Omron
24) Control: PLC Panasonic, made in Japan. 380V 50HZ
25) Computer operating panel: touching screenDetailed information of the Barrier Roll Forming Machine for Highway Terms of payment: 30%T/T ,Balance to be paid before shipping after inspection Deliver time: 50 days after get 30% down payment Warranty: 2 year warranty from date of shipment Guarantee:
● Engineer will give free training lessons to labors in buyer’s factory. ● The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer.
● During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
● We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide. Certificates Exhibition After sales service:
1).Engineer will give free training lessons to labors in buyer’s factory.
2).The Buyer will buy the round-trip air ticket for Engineer if visa application is approved.
3).The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer per day.
4).During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
5).We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.
Other supplier products
|
|
|
Working flow: Decoiler--feeding--punching--roll forming--cut to length--output table无标题文档Equipment list for wall angle roll forming machine: ... |
|
|
|
Brief Introduction of the Line Φ60High-Frequency Welded Pipe Production Line is able to produce welded pipes ofΦ17~Φ60mm in diameter and 0.7~3.0mm ... |
|
|
|
Working flow: Decoiler--feeding--punching--roll forming--cut to length--output table Equipment list: NO.ProductQuant.1Manual decoiler12Mai... |
|
|
|
Equipment structure of the High Speed Cable Ladder Roll Forming Machine: Equipment structure decoiler---Leveler---Servo-feeder---Punching----outTa... |
|
|
|
The profile drawing for the hydraulic curving machinesCurving Machine
1.Main power: 1.5 KW
2.Hydraulic power：4KW
3.Punching speed：0—8m/min... |
供应产品
Same products
