AC 500V cam controller
KTJ15A/B series of cam controllers (hereinafter referred to as cam controllers) are suitable for alternating current 50Hz, voltage 380V below the power line, used to change the three-phase asynchronous motor stator circuit connection or rotor circuit resistance value, to directly control the motor starting, speed regulation, braking or commutation.
Model: KTJ15A/B cam controller
Cam controller: KTJ
Design serial number: 15A/B
32: rated working current is 32A
Line code: D
L indicates that the handle is vertical.
Main technical parameters
Handle force: not more than 40N.
Maximum control gear: left and right five gears.
Maximum number of control loops: 15.
The electrical performance of the auxiliary contact group of the controller conforms to the technical specifications of the master controller.
The 32A controller can directly control 15 kW and below winding motors.
The 63A controller can directly control 30 kW and below winding motors.
Mechanical life is no less than 1 million 500 thousand times.
Other supplier products
|
overhead crane cab seats |
overhead crane cab seats is used to control the start,speed-regulation,commutation and brake of motors contained in crane transport ma |
|
crane cabin for largest tower crane |
crane cabin for largest tower crane SQJ7 is more suitable for 5-50t middle and large-scaled overhead and gantry |
|
overhead crane operator chair |
overhead crane operator chair is used to control the start,speed-regulation,commutation and brake of motors contained in crane transport ma |
|
100 ohm braking resistor |
1. The surface of the resistor is coated with insulating resin paint. The materials are non-toxic and environmentally friendly.
2. Vertical corrug... |
|
crane cabin for travelling tower crane |
crane cabin for travelling tower crane with air condition, In line with the theory of man-machine engineering,has reliable security protection devi... |
供应产品
Same products