Network RJ45 RJ11 Modular Plug Crimping Tool With Cable Stripper (T5376)
NetworkRJ45 RJ11 Modular Plug CrimpingTool With Cable Stripper (T5376)Specifications:Material: PC Function: crimp and cut Cat-4,Website: position Modular Plugwith white little stick made the tool adjustable ( 8p8c/6p4c/4p4c )middle part is for cutting or strippingTechnical specifications:For Modular Plug8P8C/RJ45, 6P6C/RJ11,4P4C,4P2COtherWith Cable StripperMaterialPCNet weight140g, portable Instructions:1. Place the single-bladed side of the tool's cutter facing you and cut the modular cable to the desired lenght. Make sure to cut the ends of the cord straight across, not diagohally.2. Stripping modular cable:2a. Insert 4P/6P cable into the two-bladed side of the tool's stripper until it touches the stop guide. 2b. Insert 4P/6P cable into the two-bladed side of the tool's stripper and let it extend a little past the lower cut blade. 3. Squeeze handles until it stop, cable must be kept perpendicular and the pull from the tool. 4. Remove the outer jacket, insert the stripped cable into the plug and be sure the left wire at one end matches the right wire at the other end. 5. Place modular plug with cable into the tool's holder. Be sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stop. 6. Remove the crimped plug from the tool.
Other supplier products
|
|
|
CCTV Security Micro for Surveillance System with High Sensitivity (15E)Features:1. Dedicated preamplifier IC2. High Sensitivity drive3. ... |
|
|
|
CCTV Security DVR Micro with High Definition Low Noise (505)Features:1. High Definition low noise processing chips2. Import micro noise s... |
|
|
|
POE2402SFP-3 is applied to POE IPC camera,Website:, POE WIFI AP, and POE IPPHONE, and easy for network transmission. This device comes with SFP por... |
|
|
|
4POE+1Uplink Port CCTV Power Supply POE Switch,Non-Standard POE Switch |
|
|
|
Power Supply: 12VDC 4A/B double out for battery (inside power supply for 12VDC4A1P/B) |
供应产品
Same products
