.

3.5" CCTV Security Camera Tester With Digital Multimeter (CT2603)

3.5" CCTV Security Camera Tester With Digital multimeterDescription:3.5 inch TFT-LCD,Website:, LCD Brightness/Contrast/Color Saturation are adjustable, NTSC/PAL auto display, Video signal testing, Video signal level test,  NTSC/PAL Enhanced Color bar generator, PTZ controller, UTP cable tester, PTZ data analyst, PTZ address scanning, DC12V 1A power output for camera, Audio testing, POE power supply testing, PING testing, IP address scan, Video snapshot, Video record, Image magnification, Port flicker, LED lamp, Cable scan function, Lithium Ion Polymer Battery support 11 hours working time. support more than 30 IP camera image test (Hikvision, Dahua, Honeywell, Samsung etc).Applications:—Find out the other end of the cable in security maintenance and network engineering—CCTV system installation and maintenance—Dome camera and All in one camera testing—The CCTV transmitting channel testing—PTZ controllerFeatures of the CCTV Security Camera Tester:—3.5 inch full-view TFT-LCD, 480(RGB)x320—low consumption, work for 11 hours—OSD menu, English, Chinese and other languages optional—LCD screen brightness/contrast/color Saturation adjustable—Cable scan, send the specific signal, easy to find the connected cable.—Digital multimeter, voltage, current, resistance and capacitance can be tested, continuity testing, diode testing.—Automatically identify and adapt the video mode of NTSC and PAL—Enhanced colorbar generator, by receiving the video color bar to test the video channel whether transmit normally—Moveable Micro SD(4GB micro SD included)—LED Lamp, easy to operate at night—User-defined shortcut keys(F1 and F2)—10x zoom,video image can be magnified to view the details, easy to use—Snapshot and save the current image as JPG file in the SD card—PING testing,test IP camera or other network devices’ ethernet port whether work normally, and the IP address whether is right—IP address scan, quickly search the IP address for the connected IP camera and other network devices—POE voltage measurement, test the POE switch’s voltage to IP cameras, wireless AP device and other PD devices—Device Port flicker, easy to find the connected POE switch port by sending special signals, the connected POE port will flicker at special frequency—Link monitor; check the setting IP address whether occupied—PTZ address scan, search up the ID of PTZ camera.—Network cable and Tele cable testing, display the sequence of connection and the No of the LAN cable—Multi-protocol. Supports more than thirty PTZ protocols. Such as PELCO-P, PELCO-D, SAMSUNG— Support RS232/RS485/RS422, rate 600 ~ 115200bps adjustable —Lithium Ion Polymer Battery. The device employs advanced power control and protection circuit—Display the data and image in on the screen at the same time—Easy for use that the train is almost unnecessaryFunction of the CCTV Security Camera Tester:1. Video signal testingThe new cctv tester, built-in high definition 3.5"LCD-TFT 480(RGB)x320full-view display screen, easy and directly displays the camera image qualitySupport PAL/NTSCLCD screen brightness/Contrast/Color Saturation adjustable. Suitable for field construction and maintenance work2. Video signal level testTest video signal strength attenuation, longer video signal cable will cause the image to be dim, and reduce the image dynamic range, video signal is too strong, it will cause the virtual shadow, and reduce the sharpness of the image.It also can real-display the video level value, if out of range, notices will be display in the screen. 3. PTZ controllerDisplay the input video images. Pan/tilt the P/T unit and zoom in/ out the image. Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed; set and call preset position.4. Enhanced Color bar generatorVideo Generating, the PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful imagines). By receiving the video color bar to test the video channel whether transmit normally. And judge whether the color is different, because of the transmission loss or interference, it suitable for Video transmission of the field tests, such as optical video transmitter and receiver, video cable etc.The new function color bar can test the image whether shift.The color bar (red, green, blue, white, black) test the monitor whether have white or black dot etc.5. DC12V 1A output power Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.6. Audio testing Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.7. Cable tester Test LAN cable or tele cable.Connect LAN cable or tele cable with the CCTV tester and cable tester. And then the connecting status, cable type and the sequence of wires will be displayed, as well as the serial number of the cable tester kit.8. PTZ controller Search the Control protocol code from Multifunction keyboard or DVR by RS485 /RS232 interface, test the PTZ control command data whether received anomaly and RS485/RS232 data transmission.Screen displays 16 hexadecimal codes such as PELCO-P:A0 00(Add) xx xxxxxx AF xxPELCO-D:FF 01(Add)xx xxxxxxxx9. PTZ address scanningSearch up the ID of PTZ camera. Help the engineer search the speed dome address quickly.10. Image magnification(10xZoom)Set image 10x zoom, can view and display the details by 1x、2x、3x、4x、5x、6x - 10X zoom in the monitor and tester.11. Video snapshot Capture the video image and save the current video frames as JPEG file12. Video recordRecord and save the current video in the SD card 13. Video playback Video image and record files are saved in the SD card. Storage file directory can be created according to the date 14. Port flickerThe tester will send special signals to make the connected POE port flicker at special frequency, which will enable the installers to easily and quickly find the connected ethernet cable. This function can prevent mistakenly insertion or disconnection non-corresponding cable to artificially interrupt network connection.15. IP address scan In digital IP surveillance applications, if IP camera’s IP address is not clear or forgotten; the device cannot be used .IP address scan can quickly search the connected IP camera or other network device’s IP address.16. Link monitorTo add an IP camera or other network device to the current network group, the new IP address must not be occupied, otherwise it will cause IP conflicts and stop the equipment normal working. Link monitor can check if the new setting IP address is occupied.17. PING testPING is the most conventional network debugging tools; It is used for testing if the connected IP camera or other network equipment’s ethernet port is working normally and the IP address is correct.18. POE tester It can test the PoE voltage when the POE switch is supplying the POE power to IP camera. It can clearly display the power+ and power- on the ethernet cable pins, each cable pin’s voltage and the failure connection of cable pin series numbers.19. LED lampIt is useful for the Engineer to install and maintain security system at night. LED On/Off pressing button, easy operation.20. F1、F2 User-defined shortcut keysThe user-defined shortcut key is designed for improving the efficiency for the engineer, anytime press, easy to operate.22. Cable scan Send the specific signal, easy to find the connected cable.23. Digital multimeterVoltage, current, resistance and capacitance can be tested, continuity testing, diode testing.Technical specifications:ModelCCTV Security Camera Tester CT2603 (6th generation)Video Test Signal modeNTSC/PAL (Auto adapt)Display3.5 inch digital TFT-LCD ,480(RGB)x 320 resolutionLCD adjustmentBrightness, Contrast, Saturation adjustableVideo IN/OUT1 channel BNC Input & 1 channel OutputVideo Output Mode1.0 Vp-pVideo Level testLevel testVideo signals measured in IRE or mVPTZ controllerCommunicationSupport RS232 and RS485PTZ ProtocolCompatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.Baud Rate600, 1200, 2400, 4800, 9600, 19200, 57600, 115200bpsVideo Signal GenerationColor bar generatorOutput one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )UTP CABLE TESTUTP cable testTest UTP cable connection status and display in the screen. Read the number of the test box.DC12V 1A power outputDC12V power output Output DC12V1A power for cameraAudio input testAudio input testtest the pickup and other audio equipments on the front-endRS485 data analysisData MonitorCaptures and analyzes the command data from controlling device10 x zoom of imageImage 10x zoom10x zoom image display and video outPhotograph,Video record, Record playbackPhotographsnapshot and save the current image as JPG fileVideo recordVideo record and storage the fileRecord playbackTo view the storage file in the SD cardPort flicker Port flickerFind the connected POE port quickly.IP scan, Link monitor, PING testIP scanFind out the connected IP camera or the other network equipment IP address quickly.Link monitorCheck the IP address whether is occupiedPING testingTest IP camera or Ethernet port of the other network equipment whether work normally, and check the IP addressCable scanCable scanSearch the cable by the audio signalDigital MultimeterAC/DC Voltage0-660V auto/manual range, the min resolution is 0.1mVAC/DC current660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00AResistance660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩCapacitance6.6nf~66000uF, the min resolution is 1pfDiode0~2V forward voltage, the min resolution is 1mVData holdHold the measurement optical power valueRelative measurementdisplay the difference value of the first testing resultContinuity testingBuilt-in buzzer will sound, if resistance is lower    than 50 ΩTesting speed3 times/ secondsData range-6600~+6600POE testerPOE testerDisplay the power supply voltage and cable connection statesPOWERPower AdapterDC 5V(1.5A)BatteryBuilt-in 3.7V Lithium polymer battery ,3000mAhRechargeableAfter charging 3-4 hour, working time lasts 11 hoursLow ConsumptionEnergy saving technology, the battery icon real-time displayParameterOperation settingEnglish/Chinese and other languages OSD menuAuto off5-60 (mins)KeytoneOn/OffGeneralWorking Temperature-10℃---+50℃Working Humidity30%-90%Dimension /Weight194mm x 112mm x 48mm / 540g


在线联系供应商

至: Chinasky Electronics Co.,Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

12VDC 1Amp CCTV Adapter, EU Plug (S1210E), CCTV Power Adapter
4 in 1 Installation Coaxial Cable Stripper for RG59/6 (T5224)Description:4 in 1 tool! The hole in the middle can strip RG59/6 coaxial cables. One e...
Description:8FE POE+3FE.Comply to IEEE 802.3,Website:, IEEE 802.3u, IEEE 802.3ab.Comply to POE IEEE 802.3af/at standard, all ports standard testing...
12VDC 13A 8Ch Metal Cased CCTV Power Supply (12VDC13A18P) Descrition:12VDC13A18P:1 in 8 Out Metal Cased CCTV Power Supply(8 channels)The...
Cat5 To BNC 1 Channel Passive CCTV balun(VB202C)Description:The 1 Channel Passive CCTV balun VB202Cis a passive transmission device that transmit v...
供应产品

Same products

6 Axis MIG Welding Robot For Carbon Steel
6 Axis MIG Welding Robot For Carbon Steel 卖方: 凯博锐(北京)国际贸易有限公司 6 axis MIG welding robot for carbon steelThis model has high quality and good price. We focus on ...
1800 Mm Arm Length Mig Welding Robot
1800 Mm Arm Length Mig Welding Robot 卖方: 凯博锐(北京)国际贸易有限公司 1800mm arm length MIG welding robot We supply 1800mm arm length MIG welding robot. The robot is o...
1650 Mm Arm Length Mig Welding Robot
1650 Mm Arm Length Mig Welding Robot 卖方: 凯博锐(北京)国际贸易有限公司 1650mm arm length MIG welding robotWe supply 1650mm arm length MIG welding robot. This model is t...
1440 Mm Arm Length Mig Welding Robot
1440 Mm Arm Length Mig Welding Robot 卖方: 凯博锐(北京)国际贸易有限公司 1440mm arm length MIG welding robot This model is our popular model. it is widely used in China. ...
6 Axis MIG Welding Robot For Stainless Steel
6 Axis MIG Welding Robot For Stainless Steel 卖方: 凯博锐(北京)国际贸易有限公司 6 axis MIG welding robot for stainless steel We produce welding robot from 2015,Website:, now we ...