Pharmaceutical stability chamber supplier

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Applications

Pharmaceutical Stability Testing Laboratory is designed for conducting accelerated humidity and heat testing, long-term stability testing, and constant humidity and heat testing on pharmaceutical intermediates, active pharmaceutical ingredients, finished pharmaceutical products, and medical devices. It also supports cultivation of plant and animal samples and bacterial cultures, as well as low-temperature storage, enabling analysis and evaluation of product behavior. This facility serves dedicated research in pharmaceuticals, medicine, biotechnology, food processing, electronics, and all life science-related industries.

Standards

WHO Principles Require:

Long-term stability testing conditions at 25°C/60% RH humidity.

The 40°C/75% RH humidity standard for 6-month accelerated testing is primarily applied in the pharmaceutical industry's stability testing systems, simulating environmental climate conditions including temperature, humidity, and light exposure.

Features

1.Modular Structural Integrity: The lab utilizes a unitized assembly design, allowing you to expand the internal volume or relocate the facility with minimal effort as your production scales.

2.Advanced Airflow Design: By employing a side-top air supply and side-bottom return principle, the system eliminates dead zones, ensuring that even a fully loaded room maintains exceptional temperature and humidity uniformity.

3.Precise Control Algorithms: You benefit from a micro-integral PID control system that coordinates cooling, heating, and humidification to prevent parameter overshoot and ensure rapid recovery after door openings.

4.Regulatory-Grade Monitoring: The high-sensitivity PT100 sensors and dual-mode (program/constant) operation allow you to meet the most stringent ICH stability protocols without manual intervention.

5. Safety Suite: The system includes multi-level protection against over-temperature, low water levels, compressor over-pressure, and phase-sequence anomalies, ensuring 24/7 unmanned operation safety.

Parameters

Item	Specification
Test Area Dimension	Specific dimensions to be designated by the customer based on usage conditions!
External Dimension	Subject to the quotation plan
Operating Temperature Range	SBY: 0°C ~ +60°C
Relative Humidity Range	30% ~ 95% RH
Temperature Deviation	≤±2°C (≤1°C for incubation chambers)
Humidity Deviation	±5% RH
Temperature Fluctuation	≤±0.5°C
Heating Time	≤30 min
Cooling Time	30 min ~ 180 min (varies by model)
Material	Exterior: A3 color steel plate + spray coating; Interior: SUS#304 stainless steel; Insulation layer: PU foam
Temperature & Humidity Control System	Imported fully-hermetic or semi-hermetic compressor from Europe, America, Japan, or Korea; Refrigerant: R134a; Axial flow fan with side/top air outlet; High-performance heater; Steam humidification; ADP critical point condensation dehumidification; Air-cooled or water-cooled options
Controller	Adopt Yonghe's own brand or Korean TH500/TH300 touch screen controller; Display precision: Temperature 0.1°C, Humidity 0.1% RH; Operation modes: Program mode, fixed value mode; Control method: Microcomputer PID with integral operation; Input signal: PT100 platinum resistance
Observation Window	Multi-layer hollow anti-fog explosion-proof glass
Safety Devices	Over-temperature protection, leakage protection, water shortage protection, humidification system protection, compressor over-pressure/overload/over-current protection, fan overload protection, phase sequence protection
Power Supply	AC380V (1±10%) V, 50±0.5 Hz, 3-phase 4-wire + protective earth
Optional Accessories	Temperature & humidity recorder (capable of simultaneous recording of temperature/humidity signals and multiple test points), large observation window, test hole, SMS alarm, high/low temperature deviation alarm, dual-compressor system, etc.
Extendable Products	Constant temperature incubation chamber, constant temperature & humidity test chamber, high-low temperature test chamber, constant temperature room, aging test chamber, burnout test chamber, etc.
Special Notes	Customizable dimensions available to meet customer requirements

Test Procedures

1.Startup and Monitoring:

Start the test chamber and monitor parameters such as temperature and humidity in real time to ensure they remain stable within the set range.

Record data regularly, such as sampling and testing at the end of the 1st, 2nd, 3rd, and 6th months for long-term tests.

2.Abnormal Condition Handling:

If parameters deviate from set values, immediately stop the test, inspect the equipment, and take corrective actions.

3.Recording Requirements:

Document test conditions, timestamps, and results in detail to ensure data integrity and accuracy.

4.Data Analysis:

Evaluate drug stability under varying conditions and assess degradation trends.

Prepare reports including test conditions, data, conclusions, and recommendations.

Other supplier products

	Foam Repeated Compression Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Foam repeated compression testing machine will accurately measure the thickness of the test...
	Office Chair Caster Durability Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Office Chair Caster Durability Tester is designed to evaluate the rolling durability, s...
	Residual Ethylene Oxide Gas Chromatography System	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Residual Ethylene Oxide Gas Chromatography System is a professional analytical instrume...
	G031 Fabric Liquid Penetration Time Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheG031 Fabric Liquid Penetration Time Testeris designed to measure the liquid penetration ...
	ISO 11057 Filter media performance testing System	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Aerosol Sensor Test System is designed for development, testing, and cali...

供应产品

Same products

	Cast Aluminum Lighting Base	卖方: LianJiang Metals Company	Cast Aluminum Lighting Base is the perfect solution for combining structural stability with ...
	Custom Cast Aluminium & Iron Casting Services	卖方: LianJiang Metals Company	Custom Cast Aluminium & Iron Casting Services Custom Cast Aluminium & Iron Casting S...
	Cast Aluminum Mailbox	卖方: LianJiang Metals Company	Cast Aluminum Mailbox We can manufacture any for you, including cast aluminum mailbox part...
	Cast aluminum and wrought aluminum	卖方: LianJiang Metals Company	Cast aluminum and wrought aluminum Cast aluminum and wrought aluminum perform different fu...
	PP Pickling Tank	卖方: Hebei Annuo Automaiton Technology Co., Ltd.	PP Pickling Tank PP Pickling Tank — Polypropylene Pickling Tanks for Hot Dip Galvanizing ...