Scorch Sublimation Tester
Scorch/Sublimation Tester
Testing Standards:
ISO 105 X11/P01, BS 1006, AATCC 92/114/117/133, GB/T 5718/6152, DIN 54022/54060, JIS L0879/L0850
Applications:
Scorch/Sublimation Tester is used in the laboratory to evaluate colour fastness to dry heat, hot pressing and sublimation, as well as thermal stability, The tester can perform color fastness test of fabric, chlorine damage test(resin finishing fabric), yellowing test of bleached fabric, sublimation fastness test for disperse dye, and hot water fastness test for reactive dye.
Product Information:
Scorch/Sublimation Tester is used to determine color fastness and shrinkage to hot pressing and dry heat and to conduct sublimation tests.The sample is placed between the upper and lower heating plates. The temperature of the upper and lower heating plates is controlled by the independent controller. The heating plate spacing and the weight of the upper test palte can be controlled.Test temperature ranges 120-230 ℃, with regular alarm function foran accuracy control of the testing time.
Technical Parameters:
A.Thermaplate: W100×D40mm, Aluminum (same in up and bottom);
B.Temperature control: independent digital mediators with the minimum display of 1℃(one each for top and bottom plates, respectively);
C.A pre-settable digital timer with alarm reminding;
D.Maximum temperature: 250℃;
E.Thermaplate pressure: 4±1 kPa(40cm2);
F.Heater: cartridge heater with 100V, 150W(one with each of top and bottom plates, respectively);
G.Internal Dimension: W250×D300×H230mm.
在线联系供应商
Other supplier products
 |
Medical Face Mask Air Exchange Pressure Difference Tester | Products meet the standard requirements, which is YY0469-2004 "Medical surgical mask technical requirements" and YY 0969-2013 "Disposable medical m... |
 |
Fabric softness tester | Softness Tester, to determine the softness of leather and coated fabrics and other soft materials. Softness tester does not need samples to be cut ... |
|
|
fabric labratory gas fume chamber | Gas fume chamber is designed to test the color fastness of fabric exposed to nitrogen oxide produced by gas combustion. The testerIncludes test cha... |
 |
Color fastness tester Resistant to scrub | Application:Color fastness to washing used for all types of colored textiles dry and wet friction color fastness, Color fastness test.Standards：GB/... |
 |
dry fallen wadding tester for Surgical textiles and nonwovens | The tester is used to evaluate the fallen wadding test of non-woven fabrics under dry conditions, and is mainly applicable to the evaluation of th... |
