Rubber Din Abrasion Tester
Rubber Din Abrasion Tester
The main purpose:
Din rubber abrasion testing machine is mainly used for the abrasion resistance detection of an elastic material, conveyor belts, rubber, tires, shoe soles, synthetic leather and other soft materials.
Standard：
DIN53516,JISK6369，GB/T20991，GB20265-2006，GB20266-2006，SATRATM174，BS903，JISK6264，GB/T9867，ISO4649
Main feature:
With a small sample, save time, friction way of non-repetition, low noise, high efficiency, good reproducibility and easy to operate and so on.
Din rubber abrasion tester main parameters:
1. The test piece: φ16mm, 6 ~ 15mm (D)
2. Clamp load: 2.5N
3. Weight load: 2.5N, 5N
4. The fixture lateral displacement volume: 4.2mm / wheel every lap
5. Abrasive cloth: 60 #
6. Roller Diameter: 150mm
7. Roller Length: 460mm
8. The roller speed: 40rpm
9. predetermined stroke: 40m / 20m
10. Wear Speed: 0.32m / sec
11. Inclination: 3 ° test piece and the roller support shaft vertical angle
12. Volume: 70 × 30 × 30cm
13. Weight: 61kg
14. Power source: 1∮, AC220V, 3A
Din rubber abrasion tester main principles:
What a load under a certain level in gauze, grinding a cylindrical cross-section sample determined stroke on the gauze surface, by measuring the amount of wear quality of the sample, and then by the density of the sample to calculate the volume of the amount of abrasion, in order to the test comparable, and finally be subject to the standard rubber, the test results are expressed as relative volumetric wear to verify the amount of gauze-based or full representation with respect to the amount of wear of a certain standard wear rubber base.
在线联系供应商
Other supplier products
 |
Glow wire tester | Brief IntroductionThe glow wire tester operation instructions according to the GB5169 and GB4706the design and manufacturing requirements with the ... |
 |
医用口罩的综合血透仪 | 该将在规定的测试条件下测试医用口罩对的抵抗力。 合成血液渗透测试仪的特点： 1.口罩固定装置是金属人头模具，可以完全模拟口罩的实际使用状态。 2.金属人头模具可以旋转一定角度，方便样品夹持。 3.特殊设计的注射控制装置，可以在控制时间内喷出一定量的合成血。 4.仪器使用可提供（700... |
 |
ASTM D5264 Ink Rub Tester (Rub & Abrasion Tester) | The instrument is used for testing the scuff, marking and rub resistance of cartons, films and commercial printed material. Ink Rub Tester (Rub &a... |
 |
JIS L Rubbing Colour Fastness Test machine conform to JIS L0849 | The rubbing color fastness tester is a standard testing machine of the Type II rubbing tester (GAKUSIN TYPE) specified in JIS L0849 Test Method of ... |
 |
Plastic Smoke Density Tester | IntroductionThe main principle of smoke density measurement is that in a particular space, the cable or material produces smoke under specific comb... |
