Taber muiti-finger scratch tester
Introduction
Taber muiti-finger scratch tester - Model 710is used to measure the relative resistance or susceptibility of a material surface to scratching, marring, gouging, scraping, engraving and other similar physical damage not classified as ordinary wear. Based on the apparatus described in popular automotive specifications, the instrument is commonly referred to as a five-finger (five-arm) scratch & mar tester and most often used to evaluate plastics.
Features
1. Precision instrument measures damage to surfaces not classified as ordinary wear.
Using precision tips, the Taber Multi-Finger Scratch/Mar Tester is used to measure the susceptibility of material surfaces to scratching, marring, gouging, and other similar physical damage not classified as ordinary wear.
2. Design based on five-finger scratching device described in automotive specifications.
Specimens are secured to a pneumatically driven platform. Five independent spline-shaft fingers with varying weights exert a constant, vertical load on the test specimen as it travels under interchangeable scratch tips. Spline-shaft fingers are mounted on a rigid gantry platform. Support rests allow the operator to secure individual shafts in a rest position, permitting the testing of nonstandard width samples.
3. Test a wide range of products.
The ‘five-finger’ scratch tester has been popular in the automotive industry for testing smooth or grained plastics commonly used in ornamentation or trim. Useful for quality control as well as material or product development, the Multi-Finger Scratch / Mar Tester is ideal for evaluating plastics, rigid organic materials, paints and coatings, soft metals, linoleum, plus many others.
Standards
·Ford BN 108-13 ： Resistance to Scratching
·General Motors DMN3943
·Danmler-Chrysler LP-463DD-18-01：Automotive standards
Other supplier products
|
|
Moisture Management Tester |
MMT Moisture Management Tester
Testing Standards:
AATCC 195, SN 1689.1, GB/T 21655.2
Applications:
The Moisture Management Tester (MMT) is an e... |
|
|
Digital Hydraulic bursting strength tester |
Standards： GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108 Scope of appli... |
|
|
iec60529 glow wire equipment |
Brief IntroductionThe glow wire tester operation instructions according to the GB5169 and GB4706the design and manufacturing requirements with the ... |
|
|
carpet flammability equipment |
Standards:BS 4790, ISO 6925, BS 6307Applications:The Flammability Tester is used to test the effects of a small source of ignition on floor coverin... |
|
|
Fiber Crimp Elasticity Tester |
TRANSLATE with x
English
Arabic
Hebrew
Polish
Bulgarian
Hindi
Portuguese
Catalan
Hmong Daw
Romanian
... |
供应产品
Same products
