.

45 degrees wire and cable burning instrument

Standards:

ISO6722-2006. JASO D 611/2008. SAE-J 1128-2005.QC/T730-2005. DIN 72551

Main technical parameters:

Type: touch screen automatic

Sample length: 600 ± 25mm

Fuel: methane gas or gas (own)

Flame application time: 0 —— 999.9S can be set arbitrarily

Afterburning time: 0 —— 999.9S

Flame length: inner flame 50 outer flame 100

Combustion box size: 550mm x 300mm x 700mm, with transparent glass window in front, you can observe the burning situation of the pattern

Equipment dimensions: 840mm x 300mm x 700mm

Nozzle diameter: 9mm

Blowtorch length: 100mm

The equipment is controlled by the touch screen automatic control system, the high pressure ignition is automatically calculated, the flame is automatically extinguished, and the test data can be saved

Complete configuration: control box, combustion box, burner, solenoid valve, high pressure igniter, gas pipe and signal control line group.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

High - voltage DC Stability Tester
High - voltage DC Stability Tester The high - voltage DC stability tester is suitable for testing DC high - voltage within the range of 0.1 - 5.00KV and continuously recording the ...
Seat Ingress/Egress Simulation Tester-QINSUN
Seat Ingress/Egress Simulation Tester-QINSUN Standard ISO 16840(Wheelchair Seating - Test Methods for Determining Mechanical Properties) FMVSS 207(Federal Motor Vehicle Safety Standard for...
Automotive Connectors Salt Spray Tester
Automotive Connectors Salt Spray Tester Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117. JISD 0201. GJB 150 Acetic Acid Salt Spray (AASS...
ISO 12103-2 M2 Test Dust
ISO 12103-2 M2 Test Dust Product Introduction: Particle Technology Fuel Contamination Test Dust offers a full range of fuel contamination test materials used to test the...
Thermal Insulation Materials Adhesive Strength Tester
Thermal Insulation Materials Adhesive Strength Tester Meet the standard: JGJ144-2004 "External Wall insulation engineering Technical Regulations" JG158-2004 "Rubber powder polystyrene particles exter...
供应产品

Same products

HDPE高速水冷双壁波纹管生产线
HDPE高速水冷双壁波纹管生产线 卖方: Shandong HUASU Plastic Technology Co.,Ltd. 机头模具采用双流道结构、氮化磨光处理机头,偏壁调整方便快捷,保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构,冷却充分,多点分布真空系统,效率更高,生产速度更快。 双层在线扩口功...
PanEVAP & MVR system
PanEVAP & MVR system 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
PanGAP wide gap welded plate heat exchanger
PanGAP wide gap welded plate heat exchanger 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
PanBloc welded plate heat exchanger
PanBloc welded plate heat exchanger 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
PanBox welded plate heat exchanger
PanBox welded plate heat exchanger 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...